boym1

Hello, Can anyone tell me why my printer would lose data when printing a large document. HP LaserJet 5 connected via parallel cable. > 000e| LCIM: Set Init Status 0c, sb = 000040c0, p = 0 > 000e| CHAN: CCW fetch from 94491d0 (08000000 094491d8) > 000e| CHAN: CCW fetch from 94491d8 (0960006c 094491e8) > 000e| LCIM: Set Init Status 00, sb = 000040c0, p = 0 > 000e| LCIM: Write Copy Addr = 8068d40 Len = 84, Sta = 08 > 000e| CHAN: Data Move To = 8068d40, From = 49eda1e8, Len = 108 > 000e| CHAN: SETUSTC sta = 08, sb = 000040c0, lcfpsta = 00000004 > 000e| CHAN: SETUSTC sta = 06, sb = 000040c0, lcfpsta = 00000005 > 000e| LCIM: DOSTATUS (p = 1, sb = 000040c0, ucst = 0e00) > 000e| DEBUG1: 16576 (0x000040c0) 0 (0x00000000) 3584 (0x00000e00) > 000e| LCIM: SC Wakeup (sc = 0, gi = 00000080) > 000e| LCIM: SENDMSG to CPU 0, OMSG = d6 > 000e**PRT: Write error (errno = 0, wcnt = 108, rc = 3) Thanks, Michelle

well life is getting a little better.. I was able to recover from a tape created with dd with the knoppix cd loaded.. now a new twist.. Does anyone know a way to do this with knoppix as a ram disk image so the cd could be booted then the files restored by dd from a rw cd that was created? Thanks, Michelle

Has anyone attempted this with knoppix?? Any clue what the standard root password would be? The option above looks good but we are just trying to find a fast down and dirty way to do the following: Load Redhat on a system. Update the kernel as needed for our 3rd party application. Install the third party application. Do some configuration. backup /dev/sda1 and /dev/sda3 to tape go to a new machine use raid manager to configure the disk the same as the last system recover /dev/sda1 and /dev/sda3 from the tape Any assistance is greatly appreciated.

Hello, I am very new to redhat and attempting to create a backup of one system that can be recovered to another system of the same type and configuration. Attempted to use tomsrtbt and when I attempt to recover my dd created tape it does not see my /dev/sda also have attempted to use.. HAL91 -- minimalistic Linux distribution which says you can install modules but I have not been able to get the optional kernel modules to install keep getting out of space.. arg... this is frustrating shouldn't be this hard. Any ideas or suggestions would be greatly appreciated. thanks, Michelle

I'll give it a try My second monitor is a Magview looks like 15inch listed as VM700E Model 772 100-240v 60/50hz on the back. Have to try this one later. I can not thank you for all your help.. this one just makes working hard the two monitors were great when they were working. Thanks, Michelle

Arg - ok I am not getting something correct still.. Now my 1st display can scroll from side to side and nothing is on my second monitor. . I am tired and going home Thanks # XFree86 4 configuration created by redhat-config-xfree86 Section "ServerLayout" Identifier "D# XFree86 4 configuration created by redhat-config-xfree86 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "DevInputMice" "AlwaysCore" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100"efault Layout" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "DevInputMice" "AlwaysCore" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "InputDevice" # If the normal CorePointer mouse is not a USB mouse then # this input device can be used in AlwaysCore mode to let you # also use USB mice at the same time. Identifier "DevInputMice" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Visual Sensa" DisplaySize 350 260 HorizSync 30.0 - 95.0 VertRefresh 50.0 - 160.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" VendorName "Videocard vendor" BoardName "NVIDIA GeForce 4 MX (generic)" Option "TwinView" Option "TwinViewOrientation" "Leftof" Option "NvAGP" "1" Option "CursorShadow" "1" Option "DigitalVibrance" "94" Option "TwinView" "1" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "60" Option "TVStandard" "NTSC-M" Option "MetaModes" "1280x1024 @1280x1024,600x600 @600x600;1280x1024@1280x1024,800x600@800x600" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection

8) Well I am closer -- I do have a twin view but the functionalty is not what I expected.. It shows my desk top on both screens but it use to let me use the second screen as additional works space Ex I could open a terminal window and drag it to my second monitor and have my email up on my first monitor. Any thoughts?? Thanks, Mcihelle

Taking a best guess as I do not have the manual for the monitor I entered Horiz freq 30-86 and Vert Freq 50 -150 and i get an error message when attempting to save the configuration with yanc of "No MetaModes definitions found The XF86Config will NOT be saved" What am I doing wrong?? Also Thank You very much for all your help

NFORCE2: IDE controller at PCI slot 00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA i810: NVIDIA nForce Audio found at IO 0xdc00 and 0xd800, MEM 0x0000 and 0x0000, 19:00:02 PST 2003 i810: NVIDIA nForce Audio found at IO 0xdc00 and 0xd800, MEM 0x0000 and 0x0000, IRQ 5 i810_audio: Audio Controller supports 6 channels.

# XFree86 4 configuration created by redhat-config-xfree86 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "DevInputMice" "AlwaysCore" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "InputDevice" # If the normal CorePointer mouse is not a USB mouse then # this input device can be used in AlwaysCore mode to let you # also use USB mice at the same time. Identifier "DevInputMice" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Visual Sensa" DisplaySize 350 260 HorizSync 30.0 - 95.0 VertRefresh 50.0 - 160.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" VendorName "Videocard vendor" BoardName "NVIDIA GeForce 4 MX (generic)" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection OK I am really new to linux can you tell me how to get the other information you requested? Thanks, Michelle

Hello, I am new to linux so forgive me if this a dumb question. Nvidia was set up on my Redhat system and was working then something happened. Now when I boot I see everything on both of my monitors until the point where it goes to the gui login then it changes to one monitor.- arg .. Can anyone tell me how to correct this problem??