masterlodi

I wish to restrict access to everything on an ME client with the exception of IE because the terminal is in a showroom. Is this possible.

That's perfect thank you!

I have a Win 2K Pro workstation on my network. It has two network cards in it (for two different networks) but I need to enable RIP v2 routing on it. How can this be done? We don't have a Windows Server.

Hi Ross, I've rebooted the IG1800 and it all works now! Thanks very much for your help! Cheers

Hi Ross, Just in the nick of time, I've not deleted 10.10.10.2 from the Route table. I can ping 10.10.10.2 but not 10.10.10.1! 192.168.1.57 is my PC! Cheers

(sigh) Its still not working, Ross. Here are the routes as they appear on the IG1800 Quote: Subnet IP Subnet Mask Gateway Interface 127.0.0.1 255.255.255.255 127.0.0.1 lo0 192.168.1.1 255.255.255.255 192.168.1.1 vlan0 192.168.2.1 255.255.255.255 192.168.2.1 vlan0:3 81.136.246.195 255.255.255.255 81.136.246.195 ppp0 10.10.10.0 255.255.255.0 192.168.1.55 vlan0 10.10.10.2 255.255.255.255 192.168.1.55 vlan0 10.10.10.255 255.255.255.255 192.168.1.55 vlan0 10.255.255.255 255.255.255.255 192.168.1.55 vlan0 217.47.137.74 255.255.255.255 81.136.246.195 ppp0 81.136.246.192 255.255.255.248 192.168.1.1 vlan0 192.168.1.0 255.255.255.0 192.168.1.1 vlan0 192.168.2.0 255.255.255.0 192.168.2.1 vlan0:3 127.0.0.0 255.0.0.0 127.0.0.1 lo0 0.0.0.0 0.0.0.0 217.47.137.74 ppp0 Cheers!

I added the suggested static route below and despite our efforts, it's still not playing. There progress though, as the tracert output from an XP machine gives: Tracing route to 10.10.10.1 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms bcm2k [192.168.1.55] 2 * * * Request timed out. Hope this helps! Cheers Ross

Ahhhhhhh!!!!! Light dawns!! That link was very helpful. It shows how to add a static route to the IG1800! Thing is, what is the correct route now to access the 10.10.10.x network (I know my IP addressing skills need brushing up)!

Yeah the switch is a 2wire IG1800 but is not a Router per se (as far as I'm aware). It can't see the 10.x network and never has. But I've followed your list and all of them are correct!

Hi there, The switch that the Win2K and WinXP clients connect to serves the internet connection. It's IP address is 191.168.1.1 (if that helps). Cheers

Hi Ross, I've added route -p add 10.10.10.2 MASK 255.255.255.255 192.168.1.55 I can now ping 10.10.10.2 (IP address of the NIC) but I need to access the entire network. What am I doing wrong?! Also, the NIC for 10.10.. does not have a default gateway. Cheers!

Hi Ross, I've already checked the route but I'm obviously missing something So here goes route print ================================================================ Active Routes: Network Dest Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.55 1 10.10.10.0 255.255.255.0 10.10.10.2 10.10.10.2 1 10.10.10.2 255.255.255.255 127.0.0.1 127.0.0.1 1 10.10.10.2 255.255.255.255 192.168.1.57 192.168.1.55 1 10.255.255.255 255.255.255.255 10.10.10.2 10.10.10.2 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.55 192.168.1.55 1 192.168.1.55 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.1.255 255.255.255.255 192.168.1.55 192.168.1.55 1 224.0.0.0 224.0.0.0 10.10.10.2 10.10.10.2 1 224.0.0.0 224.0.0.0 192.168.1.55 192.168.1.55 1 255.255.255.255 255.255.255.255 192.168.1.55 192.168.1.55 1 Default Gateway: 192.168.1.1 ================================================================ tracert ================================================================ Tracing route to 10.10.10.2 over a maximum of 30 hops 1 1 ms 1 ms <1 ms officeportal.gateway.2wire.net [192.168.1.1] 2 34 ms 35 ms 35 ms btdhg546-hg3.ealing.broadband.bt.net [217.32.84. 74] 3 32 ms 35 ms 35 ms 217.32.84.33 4 33 ms 35 ms 35 ms 217.32.84.106 5 * * * Request timed out. ================================================================ Cheers!

Hi Ross, thanks for your help thus far! I've got a Win2K machine with two network cards. First network (10.10..*) is tied to one card. Second network (192.168..*) is tied to the other card. The 192.168.1.* is connected to a switch and XP Pro clients. The 10.10.10.* is connected to another switch. So, the Win2K machine can route to either network but now I need to build a route (with RIPV2) so that any client on the 192.168..* network to access the 10.10..* network. Hope that makes some sense Cheers

Sorry for the confusion. I can't ping across subnets. I can only ping the two subnets on the Win2K machine. Regards.

I've made the registry change as outlined in the MS knowledge base and rebooted. According to MS, I should have an "Enable IP forwarding" on the advanved properties for the TCP/IP settings - but its not there :-(