Hi folks,
System: Fedora Core 3 / AMD Athlon 1.4 / 1 GB RAM / nVidia 64mb video w/3d acceleration / KWorld V-Stream DV/AV Expert TV Stereo card with Conexant chipset. Sticker on the bottom of the card says: KW-TV883DVR-Pro
----------------------------------------------------------------
Has ANYONE been able to get a KWorld TV card to work? I have one and would love to have it working. On a "dmesg" dump, I get a message that the card cannot be autodetected and to pass the insmod option "card=xx" to workaround it ("xx" being the correct number of the tuner this card has..."14" is the one my card has I believe). Here is the relevant section of my dmesg dump:
----------------------------------------------------------------
Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.4 loaded
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11
cx88[0]: Your board has no valid PCI Subsystem ID and thus can't
cx88[0]: be autodetected. Please pass card=<n> insmod option to
cx88[0]: workaround that. Redirect complaints to the vendor of
cx88[0]: the TV card. Best regards,
cx88[0]: -- tux
cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
cx88[0]: card=0 -> UNKNOWN/GENERIC
cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
cx88[0]: card=2 -> GDI Black Gold
cx88[0]: card=3 -> PixelView
cx88[0]: card=4 -> ATI TV Wonder Pro
cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
cx88[0]: card=6 -> AverTV Studio 303 (M126)
cx88[0]: card=7 -> MSI TV-@nywhere Master
cx88[0]: card=8 -> Leadtek Winfast DV2000
cx88[0]: card=9 -> Leadtek PVR 2000
cx88[0]: card=10 -> IODATA GV-VCP3/PCI
cx88[0]: card=11 -> Prolink PlayTV PVR
cx88[0]: card=12 -> ASUS PVR-416
cx88[0]: card=13 -> MSI TV-@nywhere
cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
cx88[0]: card=15 -> DVICO FusionHDTV DVB-T1
cx88[0]: card=16 -> KWorld LTV883RF
cx88[0]: card=17 -> DViCO - FusionHDTV 3 Gold
cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
cx88[0]: card=19 -> Conexant DVB-T reference design
cx88[0]: card=20 -> Provideo PV259
cx88[0]: card=21 -> DVICO FusionHDTV DVB-T Plus
cx88[0]: subsystem: 0000:0000, board: UNKNOWN/GENERIC [card=0,autodetected]
cx88[0]/0: found at 0000:02:08.0, rev: 5, irq: 11, latency: 32, mmio: 0xde000000
tuner: chip found at addr 0xc0 i2c-bus cx88[0]
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: cx88: tvaudio thread started
cx88[0]/0: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO
----------------------------------------------------------------
Anyone have any ideas on how to pass the correct insmod option so I can see if it will work?
Thanks!
Allen
