viabsb

I am trying to burn a cd and I've got this message: I really did not understand what happened. After 5 cd losted I gave up to burn. Can you help me? Best regards. " System ----------------------- K3b Version:0.11.14 KDE Version: 3.5.0-4.2.el4.kde QT Version: 3.3.5 cdrecord ----------------------- scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright © 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'CD-RW GCE-8523B ' Revision : '1.00' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 Profile: 0x0002 (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1951488 = 1905 KB FIFO size : 4194304 = 4096 KB Track 01: data 668 MB Total size: 767 MB (76:04.92) = 342369 sectors Lout start: 768 MB (76:06/69) = 342369 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11524 (97:28/26) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 13 Manufacturer: Multi Media Masters & Machinary SA Blocks total: 359849 Blocks current: 359849 Blocks remaining: 17480 Speed set to 4233 KB/s Starting to write CD/DVD at speed 24.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 668 MB written. /usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 01 74 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 28.143s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 761856 bytes Writing time: 239.371s Average write speed 34.6x. Fixating... /usr/bin/cdrecord: Success. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.025s timeout 200s Fixating time: 34.034s /usr/bin/cdrecord: Success. prevent/allow medium removal: scsi sendcmd: no error CDB: 1E 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.039s timeout 200s /usr/bin/cdrecord: Success. start/stop unit: scsi sendcmd: no error CDB: 1B 00 00 00 02 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.039s timeout 200s /usr/bin/cdrecord: Cannot eject media. /usr/bin/cdrecord: fifo had 76 puts and 13 gets. /usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 82%. cdrecord comand: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=24 -dao driveropts=burnfree -eject -overburn -data -tsize=342369s - mkisofs ----------------------- 342369 INFO: UTF-8 character encoding detected by locale settings. Assuming UTF-8 encoded filenames on source filesystem, use -input-charset to override. Using FPC_CROSSWIN32_2_0_1_0509000.RP;1 for Disco70/Windows/FreePascal/2.0.1/fpc_crosswin32-2.0.1-050923.src.rpm (fpc_crosswin32-2.0.1-050923.i386.rpm) 0.15% done, estimate finish Mon Feb 6 14:46:45 2006 0.30% done, estimate finish Mon Feb 6 14:18:03 2006 0.44% done, estimate finish Mon Feb 6 14:12:37 2006 0.59% done, estimate finish Mon Feb 6 14:07:00 2006 mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -volid BackUp Linux Disco70 -volset -appid K3B THE CD KREATOR VERSION 0.11.14 © 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher Marcio Carneiro <Marcio@Marcio.eng.br> -preparer K3b - Versão 0.11.14 -sysid CentOS -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bzbz6Ib.tmp -rational-rock -hide-list /tmp/kde-root/k3buWsMIa.tmp -iso-level 2 -path-list /tmp/kde-root/k3bor6ubc.tmp /root/.kde/share/apps/k3b/temp/dummydir0/ "