SHS

Good point INFERNO2000 but you forgot that even MAC has Bios know as Rom Bios & it still a legacy counterparts. In order to get rid of legacy device they need to get rid of the southbridge chip first that mean no board Ide,Usb,Bios,Com,Prt,Floppy,PS/2 or any that need the southbridge chip & Sound Card should not have a Joystick/Midi port. They need come with new kind bios for the system.

Look boys & girls ISA is far from being dead. Floppy Com Port Prt Port PS/2 Port Joystick Port Midi Port all of them are base on the ISA spec and most im one of all bios hehe. Well ever get rid of legacy no by a long shot maybe in 5 to 10 more yrs.

CUViper nope not even PC will have the upper hand why for starter NO DX8 game to utilizes the new features so **** out of lucky there and demo don't count being you can't play them. Very exspensive board to $600$ beside 3DMark2001 will most like be the frist to show this off but kind of hard to play 3DMark2001 hehehe. GeForce3 (64MB) - $600 ====================== Fabrication Process: 0.15-micron Transistors in the Core 30~50 million Rendering Pipelines 4 Texture Units per Pipeline 3 Core Speed 200MHz Memory Speed 230MHz (DDR) Memory Bandwidth 7GB/sec Pixel Fill Rate 1000 million-pixels/sec Texel Fill Rate 3000 million-texels/sec Triangles Processing Speed 120 million-triangles/sec I thougth idea being smaller die size was to make more chip's with less of cost not other way a round. So why is this so damm very exspensive ?Intel?, If there only one chip on board not much as change over GF2 & DRR dosen't cost a arm & leg now in fact you pick a stick DRR 64mb 200Mhz for a round $100 or less. I tell why now that nVidia have run off 3dfx & own them now & before long it ATI turn that if ATI don't get it head out of a@@ and start making good compatible drv. All I acn say nVidia got you boy in there back patck hahahaha. What real get me is xBox is going cost a round $300 something dosen't add up here. [This message has been edited by SHS (edited 26 February 2001).]

HN last time I check this was NT4/Win2000/WinXP Topic forum [This message has been edited by SHS (edited 24 February 2001).]

No they did not that for Windows 95/98/ME

NO not even close to being the same

send me email bud

I hope you did try install 3dfx Tools if yes that the problem.

ViolatoR666 that is 1.03 or I should the same as Voodoo5 drivers 1.04 other then INF for Voodoo3 & a bit diff setup runtime that all. The web master just goof up that all.

Malkosha what drv set are you useing ??

http://www.ratbaggames.com/

1.04.01 Mhh I don't recall 3dfx released them. Any way Swift he mix match them wrong any way I try mix the best of the best but I keep runing to compatible problem where one game run better but then other get mess up. So the glide2x, glide3x, 3dfxogl DLL in 1.04.00 have the best compatible & as well as DX drv.

Don't use them

have install the late patch ?

Yes it seem the same bug are still there in D3D better stick with 1.04.00 in both set of drv BooHoo hehehe.

If can go for IBM 1st if not then Maxtor just make you get 7200rpm The Storage Review - Hardware, Benchmarks, Reviews, News, Research, Glossary, Links and Surveys http://www.storagereview.com/

clutch channel bonding need load balancing for it work with out it dosen't work

No clutch may be this will help Network Load Balancing distributes IP traffic to multiple copies (or instances) of a TCP/IP service, such as a Web server, each running on a host within the cluster. Network Load Balancing transparently partitions the client requests among the hosts and lets the clients access the cluster using one or more “virtual” IP addresses. From the client’s point of view, the cluster appears to be a single server that answers these client requests. As enterprise traffic increases, network administrators can simply plug another server into the cluster. Here a Server Load Balancing For Free http://www.resonate.com What Intlharvester should have real said was Channel bonding "PPP multilink". Dosen't any one read what he asking for p0rnflake asking for 2x bandwidth as 400k x 400k = 800k.

I'd hate to disagree you Intlharvester, but that call Channel Bonding that give you 2x bandwidth as for Load Balancing it dosen't give you 2x bandwidth. Some 101 on it http://www.internetwk.com/reviews/rev012599.htm http://www.bankruptcylawclinic.com/~dwhite/184rept.html

See this Model 2920's performance is further enhanced by its on-board controller and DSP (Digital Signal Processor). Read the FAQ (Frequently asked questions with answers) on Digital Signal Processing http://www.bdti.com/faq/ Look at this part http://www.bdti.com/faq/3.htm#332

Sorry rompil the Zoom 2920 PCI modem was not the frist real hardware PCI modem out. I own the frist hardware PCI modem, Actiontec 56K Internal PCI Call Waiting Modem my moddem support everything under the sun DOS, Windows 3.1, 95, 98, NT, OS/2, & Linux. http://www.actiontec.com/products/modems/cwi/cwi_specifications.html Your Modem Dosen't support Dos so that make it a Soft Modem no if or an't or but about. http://www.zoomtel.com/datasheets/56kpci-2920.html I yes I know what Soft Modem is.

All you have to do copy is the ?:\Program Files\Icq\2000b or 2000a or if you have older ver like 99a or 99b is the folder name. Then get ICQ reinstall go thur all setup stuff then after log on to ICQ count 5sec then close ICQ & copy that folder back restart ICQ you now should have everbody on contact list plus all thoses message. as for 2 you do not need to do that

Well I hate tell you this but it saying under Features "Software upgradeable" that make it softmodem, But you may went try disable call waiting feature.

ThC 129 lower memory timing try run 3-3-3 & put the 128 in frist dimm slot follow be 256 what this will do it make PC133 run at PC100. Most of 128 PC100 don't like run 3-2-3 win add more memory.

3hat kind of modem do you have ?