SHS

give it the same workgroup name. Start with 192.168.0.2 on frist Clinet PC 2nd Clinet PC 192.168.0.3 number so on up the line All PC should have Gateway address 192.168.0.1 Preferred DNS address 192.168.0.1 & this dose help to add in your ISP DNS address to.

cool I'am on it

go here under files you find the rigth drivers http://seldzar.dhs.org/ You must copy files in safe mode. c:\winnt\system32\3dfxspl2.dll c:\winnt\system32\3dfxspl3.dll c:\winnt\system32\glide2x.dll c:\winnt\system32\glide3x.dll c:\winnt\system32\3dfxvgl.dll c:\winnt\system32\voodoo3.dll c:\winnt\system32\drivers\voodoo3.sys As far as Half Life gose don't use opengl ICD nor DX use 3dfx mini driver under the opengl setting that only one that work rigth in Half Life. I say agine for ten millin time LW3 dose not work work in RC2 2128 you must have 2151 or higher.

go to your dialup internet connection & rigth click & go to properties to last tab will be ICS

I wish you & your new wife the best of Lucky.

did you update to NOV drivers ?. If so I have some problem as you & not just Win2K allso in Win98SE to. I still try to fine a fix for this but have not found one.

You should real use NTFS it is far better then 32bit fat

We all ready know this, That rigth for developers only. Not just Voodoo3 but all so have Voodoo1 & 2 Banshee & drivers as well.

yes there still valid

Unreal Tournament work's just fine here

I see he didn't add the root tag file that setup disk is looking for "cdrom_ip.5 & cdrom_nt.5". The disk lable has nothing to do with it. You can install from the harddrive It should look like this d:\cdrom_ip.5 d:\cdrom_nt.5 open notepad type "ENMJRH" save as cdrom_ip.5 & do the same for cdrom_nt.5 d:\i386 "folder & it sub folder"

what are spec of your system "everything".

Dose Q3A Crash on you or is graphics mess up ?. I send this up today. For those with Quake3 Arena & Win2K RC3: Yes it ture the Quake3 Graphics do get bit mess up big time. This seem to help a lot but it still mess up with this fix, extract the older opengl32.dll & glu32.dll from RC2 2131 md c:\temp change over to CDROM drive ?:\cd\i386 expand -r opengl.32.dl_ glu32.dl_ c:\temp then copy over to \winnt\system32 folder

He didn't write them I did a translation of what ?. What builder do you have ? if RC2 builder 2128 or higher you need RC2 fix http://pluto.spaceports.com/~compatib/files/Voodoo3_RC2_D3DGlide_Fix.zip

hehehe frist part is funny but I hope didn't real fights with your wife over this ?. Maybe that why it works for me & not everyone esle I don't have modem in my system Hmm. This maybe the key all of it "disable Irq steering" wierd my BIOS is set PnP OS in fact evenything set PnP other then Manuel assign each PCI Slot.

Are you try to say How can I build a bootable CDROM for Win2K ?.

This My little Baby Intel 300a@450a celeron Abit BH6 Motherboard 2, 128meg SDRAM 168pin DIMM Creative Lab's SB Live! Value Realtek RTL8029(AS) PCI Ethernet NIC Adaptec 2910c PCI Mat****a CD-R CW-7501 Toshiba DVD-ROM SD-M1202 Western Digital 8.4gig IDE Primary Hewlett Packard 420c Printer Microsoft SideWinder 3D Pro Microtek Scanmaker E3 Microsoft PS/2 IntelliMouse with Wheel Microsoft Natural Keyboard PS/2 ViewSonic G773 3dfx Voodoo3 2000 PCI 16meg PCWorks FourPointSurround FPS1000 speakers I haven't fig out why some poeple system work & other don't.

Ok you all don't use Default mode use 3dfx mini driver under OpenGL driver.

Igor is modem Harware modem or software modem ?. Try this Igor Remove all com from the device manager power down "hardware modem" maunel set the jumper to COM1 IRQ4 & disable all com in the BIOS before booting back in to Win2K. "PnP modem" you have set the com port in the device manager.

You didn't offend me or any esle here. You got that rigth it is a diff animal. yes it will expire at some point how dose 444 Days sound to you hehe that over 1 yrs. You can alway check it by at the Dos Promtp "typeing" winver.

Igor the Abit BH6 dosen't have a ATA66 nor dose Abit BH6R2. I try flashing the CDROM Frist then Boot in to Win2K if didn't work then do your mother board BIOS.

That rigth there no diff difference between RS-232C & RS-232 DB9 & DB9 that why I ask but the DB9 & DB25 do have a small difference Maybe this Help http://isdn.alr.com/autobahnFAQ.htm#3.1 3. Trouble Shooting 3.1 Q. When I attach my AUTOBAHN to my PC via serial port and start my terminal program (i.e., Hyper Terminal), I get random ASCII characters instead of the menu. A. Check the terminal programs settings (properties). The terminal program should have NO FLOW CONTROL 9600 BAUD 8 BITS NO PARITY 1 STOP BIT VT100 EMULATION After you have made changes to the settings you will need to press CTRL-L to redrawn the screen. If the terminal program is still getting random ASCII characters instead of the menu, close then restart the terminal program. If it still gets random ASCII characters, the Autobahn’s baud rate may be set to either 19200, or 38400. Try changing the port speed of your terminal emulation program to one or the other. [This message has been edited by SHS (edited 29 November 1999).]

are both end DB9 or do you have DB9 with DB25

are you showing in the Device Manager com 3 & 4 ?.

You ask how to get Win2K RC3 only beta tester get. I close it becase some poeple post link to Warez site or FTP site instead of just E-Mail that person & keep stuff like off this Forum.