YuppieScum

One other thing to remember is that and LCD panel is a fixed resolution - at the moment 1024*768 or 1280*1024 (like mine). # Using an LCD at other that it's native resolution gives a much worse image than a CRT. At the end of the day, it's a trade-off in resolutions - the potential of 1600*1200 against the quality of 1280*1024...especially when digital-output video cards/digital-in LCD monitors are considered...

I've just seen - on the front page of this site - a "news" item about a new BIOS for the Matrox G400, but the link gets me to the BIOS dated August 1999. What a bag of wank. Is it too much to ask that the links to new material actually link to new material..?

Hm... Even after flushing my local browser cache, the Matrox page still only shows the 1.04 BIOS as being current. Most odd.

The 3dfx-provided drivers are crap - the Anthony Toaste "kludge-ware" drivers are much better (even though they don't do DirectX) but some versions have a mis-named DLL in the INF. Make sure you're using the latest d/l from this site...

Try the beta of MS Media Player 7. It appears to have native support for this device - however I don't have one so I can't say if it works...

Adaptec 4.x, Nero 4.x and 5.0.0.3, CDRWin 3.8x, FireBurner 1.06 and probably some others I can't remember at the moment all work for me under W2K with my SCSI Yamaha 4416.

File compression is always about trade-offs. You reduce the actual disk and bus I/O (because the data is smaller) but increase the load on the CPU (compression/decompression). The best way to determine its worth is by running your own benchmarks - trust none that are run for you, as YMMV. Also, using it on ZIPs or on files that are constantly modified would be bad. Finally, as far as the FTP clients are concerned, they just see files - all the compression is done by the underlying file system.

Go to the "Effects" tab of the Display Properties dialog. Click on an icon across the top, then click "Change Icon"...

It may already be supported by the OS. Check the W2K Hardware Compatability List...

As has been mentioned several times before, the native S3 drivers do NOT support multi-monitor use. Check the W2K HCL for a list of cards/chipsets that will work...

I'm here! I've been running a Trinity 400 (BIOS rev 1.06) for about 8 weeks now - 24*7 - with a PIII-550e, 2*256Mb and a 20Gb UDMA2 drive under NTFS. When I was setting this up, I also tried it with a Celery 300a @450 - same deal, it just worked. Aha - Tyan have just released BIOS 1.07...back later.

I would expect (although you haven't mentioned your hardware) that the drive is on a ATA66/UDMA2 controller. W2K will not natively support these devices, so you have to get the W2K drivers from the vendors web site, and either install them during setup when asked for additional SCSI drivers, or put the drive on a regular IDE port, install W2K, install the drivers then place it back on the ATA66.

W2K does NOT require ACPI in order to run successfully. Any statements to the contrary are worthy of nothing more than hot grits down the pants...

The cam (and the drivers) are OEM'd from a firm in England (the also sell to Pace and a few others) - you can get their name by checking the properties of the drivers. The main problem is that the core USB driver for the cam is actually 16-bit, and they have no interest in re-writing it. I would recommend either selling or giving away the CL cam and buying the Intel instead as it is natively supported...at least, that's what I did...

Also, putting the page file on a slave device where the game/OS is on the master in an IDE environment is very, very bad indeed - due to the single device/blocking nature of IDE. This might explain bad performance... Damn. 600 posts and I'm STILL not "The Man".

Also, if you'd been paying any kind of attention at all, you might have realised that the best place for a post of this sort is in the "Other" forum... [This message has been edited by YuppieScum (edited 10 May 2000).]

Also, if you'd been paying any kind of attention at all, you might have realised that the best place for a post of this sort is in the "Other" forum... [This message has been edited by YuppieScum (edited 10 May 2000).]

Q1 was still a 32-bit DOS application, and so will **** up badly under W2K. Go to any worthwhile ID mirror site (CDROM, etc) and download a front-end called WinQuake. This is the EXE that'll let it run under W2K.

jdulmage is the lovechild offspring of a bizzarre genetics experiment involving Bill Gates, Larry Ellison, Scott McNealy and Steve Case... Had to do this just to get my post count up to 600...

Take a look at the HCL first to find out what chipsets are actually supported... That said, you can get good deals on PCI TNT1 cards...

Don't use and S3 card in a multi-mon setup. They're not in the HCL, so any reports to the contrary are just that - reports. Buy a real card.

www.adaptec.com That's the first place to go about SCSI. Read that, then ask again...

Not really. You can buy "managed" hubs that have sufficient intelligence to determine what is happening and report it. Perhaps if you explained what the actual problem you have is, together with you hardware config and what you've already done/tried, we might help further...

Not true. Server machines might not do suspend, but power-down from the console is a very important requirement for remotely managed machines. The Compaq Proliant boxes I've been responsible for have had this feature... Perhaps W2K/AS doesn't install APM support by default. Have you tried adding support for it?

The mobo needs to support APM or ACPI (or have the enabled in the BIOS) before the option will appear in W2K of whatever stripe. W2K in all it's variations supports both APM and ACPI, but if the mobo doesn't then you're SOL.