Seldzar

I used a gf2 GTS and 2 v3 pci cards and had triple monitor working no problem a while ago, however 3 monitors is just too much.

Highly unlikely that will work as you would be changing the boot controller and that will most likely cause winxp to barf on reboot(irq_not_less_than_or_equal bluescreen). This usually happens when you change motherboards on 2k/xp that have different IDE controllers. However I haven't tried it so it MAY work, and I can't say it won't as I'm not 100% certain. In the KR7A manual there is something about being able to assign specific irq's to certain devices to get around this kinda issue for Win2k/XP. It would probably be easier and quicker to just format and reinstall however.

hehe first off if you didn't steal the game(like me) then you should go get the update patch. It adds all the missing options and fixes lots of things. However to enable your joystick it's as mentioned above(this is in the readme also) Cntrl + J changes from 5 different presets(which all don't work right) I use the custom mode as it works best with my dual analog stick. To change resolution(which still doesn't look right on the interface hit cntrl + shift + 6 through 9. Performace also suffers when the res is changed. F4 changes your view The US release of the game in feb should contain all these missing features(in otherwords it will be a patched and finished game, unlike the european release)

err how about the quick and simple way? Right click floppy, select format, check off create msdos startup disk. Format disk, use it to boot with.

90% of all creative issues are with VIA chipsets. It seems EVERY person I see having issues with a creative sound card have a Via chipset of some sort. I've owned a Philips Acoustic Edge(worked great and had very few problems) they are a viable choice but I always seem to end up going back to creative. My sblive didn't give me ANY issues in my MSI K7T Turbo however that doesn't mean some of you won't find issues. Read this and understand why http://www.tecchannel.de/hardware/817/index.html I put my Audigy in my New KR7A Raid and I managed to kill it, however my sblive works flawless in it =) I have since replaced the Audgiy and it works just dandy in this board now. I recommend trying the PCI latency patch if you have issues. In the end I'll repeat, the MAJORITY of issues that plague users with creative soundcards are via chipset/pci bus issues with odd hardware configs. There are the occasional driver issues but on the whole creative cards work good if you know how to setup your box and know what you are doing when an issue pops up(ie you know how to troubleshoot not cry, scream and point fingers) My setup: Tbird 1.0ghz @ 1.4ghz (10.5x133) Abit KR7A Raid Crucial 256mb DDR 2 x Maxtor 60gb ATA133 HD's in Raid 0 AGP: Asus GF2 (250/420) PCI1: Empty PCI2: 3dfx Voodoo3 2000 PCI (2nd Montior) PCI3: Creative Audigy or SBlive! PCI4: ATI TV Tuner PCI5: Empty PCI6: Surecom 10/100 Nic Aopen 24x10x40 Toshiba 12x DVD

Go buy a GF2 mX. Very simple and easy solution, your voodoo isn't going to work properly in XP, err ever.

My audigy works perfect, I have no driver issues or sound issues. However I will say upon moving my highpoint raid controller to a pci slot underneith the card I had some noise on boot up. However moving the raid card back above the soundcard removed it completely. I also have a amd and kt133a chipset and have had no compatability issues with it.

Change desktop res, color, refresh while it's open and eventually it will clear up. It's an issue with nVida cards. Or try out winDVR from http://www.intervideo.com/jsp/WinDVR_Download.jsp

Question, why is it this bothers you guys enough to give a rats ***?

Sorry goatse.cx creative MAY have their own cable but you do NOT need it. I just use a standard 1/8 inch stereo headphone connector that splits into a left and right coax(rca) cable and checked to see whether left or right was carrying the signal to my 5.1 speakers with Dolby Digital decoder box. Plugged in the side with the signal and i'm off to the races. This works on my Sblive value and my Audigy.

Quote: CL's webpage has a signup so you'll get notified about the driver release. They state that they'll be out by mid-oct. With XP being the replacement for the 9x line, I'm pretty sure they'll be out on time. Cryptix Thats nice and all but kinda irrelivent as the drivers on the cd work flawless. SO either way I don't care too much, we shall see when the time comes if they are the same or an update.

Take your pick, go back to win2k or buy a new vid card, Thats it. O and you can't buy XP yet unless you get a brand new pc and as far as I know no new pc's are coming with any 3dfx cards

hehehe I emailed him as well. So hopefully either one of us will get some answers.

Thats what I thought to but I tried it and it still didn't work. I guess that would be a question for the guy who wrote the MAD plugin or creative. Betting that creative wouldn't have a clue, or just brush you off this is probably better left to the author of MAD.

Yeah , I just configured my Directsound device to Audigy C400 and then it played fine. Level seemed a little less than wave out however. I also highly recommend MAD plugin for winamp, it sounds incredible on the Audigy. Especially at 96khz =) http://www.mars.org/home/rob/proj/mpeg/mad-plugin/