Okay, im having lots of problems burning cd's. But, it used to work....so far, in this config, ive burned about 6 successful cd's, wasted bout 10, with 4 messed up in a row....i have aspi 4.6, and ive tried adaptec 4.0 and the newest Nero. I have a Diamond Fireport 40 scsi card with latest drivers (but i dont tihnk they are 2000 drivers), i have a Teac 56-s drive with the latest firmware (1.0M)with build 2126. P-2, 266, 128 megs ram, viper v330. ive tried burning from another scsi drive and from an ide drive...both fail. below, i have posted a log from one of the more recent failings....doesnt make much sense to me, if it doesn to any of you, i hope you guys can help out! thanks a lot
Windows NT 5.0
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1019), size=45056 bytes, created 5/10/1999 4:06:00 AM
Nero Version: 4.0.7.0
Recorder: <TEAC CD-R56S> Version: 1.0M - HA 2 TA 2 - 4.0.7.0
Adapter driver: <FIREPORT> HA 2
CD-ROM: <TEAC CD-R56S> Version: 1.0M - HA 2 TA 2
Adapter driver: <FIREPORT> HA 2
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 Byte
ShowDrvBufStat : 0
EraseSpeed : 0
RW-Sync : 0->0
BUFE : 0
Physical memory : 127MB (130596kB)
Free physical memory: 35MB (36584kB)
Memory in use : 71 %
Uncached PFiles: 0x1C
Wizard: Off
CD-ROM (ISO)
13.11.1999
9:24:18 AM #1 ISO9660GEN -11 File Geniso.cpp, Line 3245
First writeable address = 0 (0x00000000)
9:24:18 AM #2 ISO9660GEN -12 File Geniso.cpp, Line 3251
Data Mode: 1, Write Mode: TAO
9:24:18 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3245
First writeable address = 0 (0x00000000)
9:24:18 AM #4 ISO9660GEN -12 File Geniso.cpp, Line 3251
Data Mode: 1, Write Mode: TAO
9:24:25 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3245
First writeable address = 0 (0x00000000)
9:24:25 AM #6 ISO9660GEN -12 File Geniso.cpp, Line 3251
Data Mode: 1, Write Mode: TAO
9:24:28 AM #7 Phase 24 File dlgbrnst.cpp, Line 897
Start of caching files
9:24:28 AM #8 Phase 25 File dlgbrnst.cpp, Line 897
Caching files completed
9:24:28 AM #9 Phase 32 File dlgbrnst.cpp, Line 897
Start of simulation at 2x (300 KB/s)
10:01:15 AM #10 Phase 33 File dlgbrnst.cpp, Line 897
Simulation done successfully at 2x (300 KB/s)
10:01:16 AM #11 Phase 36 File dlgbrnst.cpp, Line 897
Start of burnprocess at 2x (300 KB/s)
10:01:50 AM #12 SCSI -1000 File Cdrdrv.cpp, Line 1901
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1E 0x00
10:01:50 AM #13 CDR -1175 File Cdrdrv.cpp, Line 1932
Internal trace
Command timeout occured (waitqueue): timeout 30000ms, counter 1, sended 1
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1E 0x00 SCSI Buffer: 86016 of 20971520 bytes free (low 0, high 86016)
10:01:50 AM #14 CDR -21 File Transfer.cpp, Line 1183
Waitqueue failed
10:01:50 AM #15 TRANSFER -20 File Isotrf.cpp, Line 1126
Could not perform Write
10:02:15 AM #16 SCSI -1000 File Cdrdrv.cpp, Line 977
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5B 0x00 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00
10:02:15 AM #17 CDR -1175 File Cdrdrv.cpp, Line 995
Internal trace
Command timeout occured: timeout 10000ms, counter 2, sended 1
CDB Data: 0x5B 0x00 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00
10:02:15 AM #18 SCSI -1000 File Cdrdrv.cpp, Line 1020
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5B 0x00 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00
10:03:15 AM #19 SCSI -1000 File Cdrdrv.cpp, Line 977
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00
10:03:15 AM #20 CDR -1175 File Cdrdrv.cpp, Line 995
Internal trace
Command timeout occured: timeout 10000ms, counter 8, sended 1
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00
10:03:15 AM #21 SCSI -1000 File Cdrdrv.cpp, Line 1020
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00
10:03:15 AM #22 CDR -1000 File Isotrf.cpp, Line 1197
SCSI/IDE error
10:03:15 AM #23 TRANSFER -18 File Isotrf.cpp, Line 1198
Could not perform EndTrack
10:03:25 AM #24 SCSI -1000 File Cdrdrv.cpp, Line 977
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1A 0x00 0x05 0x00 0x44 0x00
10:03:25 AM #25 CDR -1175 File Cdrdrv.cpp, Line 995
Internal trace
Command timeout occured: timeout 10000ms, counter 9, sended 1
CDB Data: 0x1A 0x00 0x05 0x00 0x44 0x00
10:03:25 AM #26 SCSI -1000 File Cdrdrv.cpp, Line 1020
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1A 0x00 0x05 0x00 0x44 0x00
10:03:25 AM #27 CDR -1000 File Isotrf.cpp, Line 1234
SCSI/IDE error
10:03:25 AM #28 TRANSFER -19 File Isotrf.cpp, Line 1235
Could not perform Fixation
10:03:35 AM #29 SCSI -1000 File Cdrdrv.cpp, Line 977
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1A 0x00 0x05 0x00 0x44 0x00
10:03:35 AM #30 CDR -1175 File Cdrdrv.cpp, Line 995
Internal trace
Command timeout occured: timeout 10000ms, counter 10, sended 1
CDB Data: 0x1A 0x00 0x05 0x00 0x44 0x00
10:03:35 AM #31 SCSI -1000 File Cdrdrv.cpp, Line 1020
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1A 0x00 0x05 0x00 0x44 0x00
10:03:35 AM #32 TRANSFER -20 File Isotrf.cpp, Line 1256
Could not perform Write
10:03:35 AM #33 Phase 38 File dlgbrnst.cpp, Line 897
Burnprocess failed at 2x (300 KB/s)
10:03:45 AM #34 SCSI -1000 File Cdrdrv.cpp, Line 977
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00
10:03:45 AM #35 CDR -1175 File Cdrdrv.cpp, Line 995
Internal trace
Command timeout occured: timeout 10000ms, counter 11, sended 1
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00
10:03:45 AM #36 SCSI -1000 File Cdrdrv.cpp, Line 1020
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00
10:03:45 AM #37 CDR -1000 File Burncd.cpp, Line 2195
SCSI/IDE error
10:03:55 AM #38 SCSI -1000 File Cdrdrv.cpp, Line 977
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00
10:03:55 AM #39 CDR -1175 File Cdrdrv.cpp, Line 995
Internal trace
Command timeout occured: timeout 10000ms, counter 12, sended 1
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00
10:03:55 AM #40 SCSI -1000 File Cdrdrv.cpp, Line 1020
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00
10:04:05 AM #41 SCSI -1000 File Cdrdrv.cpp, Line 977
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00
10:04:05 AM #42 CDR -1175 File Cdrdrv.cpp, Line 995
Internal trace
Command timeout occured: timeout 10000ms, counter 13, sended 1
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00
10:04:05 AM #43 SCSI -1000 File Cdrdrv.cpp, Line 1020
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00
10:04:15 AM #44 SCSI -1000 File Cdrdrv.cpp, Line 977
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00
10:04:15 AM #45 CDR -1175 File Cdrdrv.cpp, Line 995
Internal trace
Command timeout occured: timeout 10000ms, counter 14, sended 1
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00
10:04:15 AM #46 SCSI -1000 File Cdrdrv.cpp, Line 1020
SCSI Exec, HA 2, TA 2, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1B 0x00 0x00 0x00 0x02 0x00
Existing drivers:
File 'Drivers\NEROCDNT.SYS': Ver=3, 0, 0, 4, size=13344 bytes, created 11/9/1999 12:30:58 AM
File 'Drivers\CDR4VSD.SYS': Ver=2.5 (075), size=60560 bytes, created 6/2/1999 2:50:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1019), size=25244 bytes, created 5/10/1999 4:06:00 AM