vf

hehe, changing mobo and other hardware in w2k is really fun just shut down, replace the mainboard, and start it up normally. After one or at max two restarts you are done. I did so when i upgraded from my p3b-f to an athlon mobo. Only had to reinstall the nvidia drivers afterwards, but all other drivers remained...

If you have a scsi cd-r and an adaptec controller you can download the aspi32.exe from adaptec's ftpserver and delete the wnaspi32.dll in nero's folder. then you will be able to burn CD-Rs without being admin Nero still complains, but it works anyways Maybe this also works with easy cd creator, i don't know... [This message has been edited by vf (edited 16 May 2000).]

there is another one... just edit your machine.inf - gave me agp back without a new *.sys file after installing a kx133 mobo : Code: --- machine.inf Tue Dec 7 04:00:00 1999+++ machine with support for AGP on via kx133.inf Sun Apr 2 23:55:50 2000@@ -300,6 +300,7 @@ %PCI\VEN_1060&DEV_E891.DeviceDesc% = NO_DRV, PCI\VEN_1060&DEV_E891 [VIA_SYS]+%PCI\VEN_1106&DEV_0391.DeviceDesc% = NO_DRV, PCI\VEN_1106&DEV_0391 %PCI\VEN_1106&DEV_0501.DeviceDesc% = NO_DRV, PCI\VEN_1106&DEV_0501 %PCI\VEN_1106&DEV_0505.DeviceDesc% = ISAPNP_DRV, PCI\VEN_1106&DEV_0505 %PCI\VEN_1106&DEV_0576.DeviceDesc% = ISAPNP_DRV, PCI\VEN_1106&DEV_0576@@ -314,6 +315,7 @@ %PCI\VEN_1106&DEV_3050.DeviceDesc% = NO_DRV, PCI\VEN_1106&DEV_3050 %PCI\VEN_1106&DEV_3051.DeviceDesc% = NO_DRV, PCI\VEN_1106&DEV_3051 %PCI\VEN_1106&DEV_3057.DeviceDesc% = NO_DRV, PCI\VEN_1106&DEV_3057+%PCI\VEN_1106&DEV_8391.DeviceDesc% = VIAAGP_Install,PCI\VEN_1106&DEV_8391 %PCI\VEN_1106&DEV_8598.DeviceDesc% = VIAAGP_Install,PCI\VEN_1106&DEV_8598 %PCI\VEN_1106&DEV_8501.DeviceDesc% = VIAAGP_Install,PCI\VEN_1106&DEV_8501 %PCI\VEN_1106&DEV_8601.DeviceDesc% = VIAAGP_Install,PCI\VEN_1106&DEV_8601@@ -942,6 +944,7 @@ PCI\VEN_1060&DEV_E891.DeviceDesc = "UMC Pentium(r) CPU to PCI bridge for notebook" VIA_MFG = "VIA"+PCI\VEN_1106&DEV_0391.DeviceDesc = "VIA Tech CPU to PCI bridge" PCI\VEN_1106&DEV_0501.DeviceDesc = "VIA Tech CPU to PCI bridge" PCI\VEN_1106&DEV_0505.DeviceDesc = "VIA Tech 82C5x5 CPU to PCI & PCI to ISA bridge" PCI\VEN_1106&DEV_0576.DeviceDesc = "VIA Tech 82C576 CPU to PCI & PCI to ISA bridge"@@ -956,6 +959,7 @@ PCI\VEN_1106&DEV_3051.DeviceDesc = "VIA Tech Power Management Controller" PCI\VEN_1106&DEV_3057.DeviceDesc = "VIA Tech Power Management controller" PCI\VEN_1107&DEV_0576.DeviceDesc = "VIA Tech 82C576 CPU to PCI & PCI to ISA bridge"+PCI\VEN_1106&DEV_8391.DeviceDesc = "VIA Tech CPU to AGP Controller" PCI\VEN_1106&DEV_8598.DeviceDesc = "VIA Tech CPU to AGP Controller" PCI\VEN_1106&DEV_8501.DeviceDesc = "VIA Tech CPU to AGP Controller" PCI\VEN_1106&DEV_8601.DeviceDesc = "VIA Tech CPU to AGP Controller" just insert the lines marked with + as lined out [This message has been edited by vf (edited 11 May 2000).]

last time i visited pq's website, they didn't claim they are win2k compatible with the current versions of their progs. There will be updates though, to provide compatibility

if you can get the 29160 cheaper than the 29160n, go for the cheaper one, i also did . It's a 64bit PCI card! (and still works in a standard 32bit PCI). You'll get four scsi connectors which you can use at all the same time, two of them (external + one internal) being LVD scsi, the two other internal ones are just U(W). Quite nice

well, i need this feature... i have some special hardware (my DVB satellite receiver) connected to my computer through scsi. But my prog won't find it on the scsi if it wasn't switched on during bootup or if i switch it off and then on again later while windows is still running. using rescan in win98 the receiver was found again. So i need it... Any idea?

hiho, anybody knows a way to rescan the scsi bus in win2k to find devices that have not been powered on when the computer started. In win98 it was easy - just needed to press "update" in devicemanager, but that does not help in win2k... :-( thx

There is an update from MS for w2k concerning games. Don't know the exact filename anymore but you should be able to find it on their site. If you haven't installed it yet, that could maybe help...

Anyone having this fine piece of hardware working in win2k? Since win didn't recognize the wheel, I installed the TM ProPanel ver1.1. Then I added it to available joysticks but win always thinks that there is no device connected... What should I do? NE1 got an idea? thx ps: maye i should add that i have connected it to my SBLive! (still with default win2k drivers) [This message has been edited by vf (edited 23 March 2000).]

The way to reduce cpu usage should be to make windows _use_ an interrupt for the parallel port. Otherwise win always has to ask if new data is to be sent out to the lpt, and that causes the 100% usage. But as euankirkhope already said (and also windows-help) - that can produce new issues you maybe don't want to deal with... [This message has been edited by vf (edited 23 March 2000).]

OK, I installed it now, but unfortunately it only updates when I press update... I need constant updates without any user-interaction. NE1 have another hint?

But what is easier - changing the registry on _all_ workstations or just making _one_ samba-server use encrypted passwords?

Should work too, if you know the registry path... But why didn't you use encrypted passwords from the beginning on?

You need to enable encrypted passwords in samba, then it should work, at least here it does. For me, the other direction is not working (accessing a 2000 share from samba). Still haven't found anything to solve that.

Thx, never thought of searching on the CD...