PrinceAli0

Hey All, Got a 40 Gig drive thats about 45 to 50 % free and when I Defrag, upon completion it tells me that some files cannot be moved. The problem is when I load up Defrag again it analyzes my drive and tells me that I should Defrag the drive that just took 3 hrs to complete. Whats up with this. Any Ideas? Thanks PrinceAli0

Hey Guys, We’ve got a situation we are ready to go AD by upgrading our PDC from NT4.0 SP6a to Win2k and then AD from that point. The problem is we plan on taking our current domain ATCNTD1 to ATICORPORATE.COM and the main location in Long Island (Corporate HQ) will be a child domain ATILI.ATICORPORATE.COM, a child domain of the ATICORPORATE.COM (also at Corporate HQ). We’ve got multiple locations in our NT Domain (ATCNTD1) with our other Exchange Servers. These sites will eventually be child domains (e.g. Memphis ATIMP.ATICORPORATE.COM). Right now we are at ATCNTD1 and we want to be at a child domain level equal to all our sub locations which will also be child domains. The problem is we’re stumped about where we should locate our main Exchange Server (ATCNTS3). We want to use ADC for mirroring our Exchange Organization (2 Sites/Multiple Servers) users in AD and them converting all the accounts to 2k accounts but we’re not sure where we should place our Exchange Organization at the master level or the child domain level. Should Exchange information be put at ATICORPORATE.COM or at ATILI.ATICORPORATE.COM, any ideas? OLD Corporate HQ -----------------------T1 Frame--------------->Memphis Location (Domain) ATCNTD1 (BDC for ATCNTD1 Domain) MEMPHIS1 | | | | (Exchange Server) ATCNTS3 (Exchange Server) MPMAIL NEW Corporate HQ ATICORPORATE.COM *1 | | -------------------------------------------------------T1 Frame---------------- | | | | | | Corporate HQ Memphis Location (Child Domain)ATILI.ATICORPORATE.COM *2 (Child Domain) ATIMP.ATICORPORATE.COM Does the Exchange 5.5 SP2 server we currently have (ATCNTS3) get its information imported at the *1 or *2. Are we required to have the main exchange site located at the top level of the domain tree or does it have to remain at the Child level where our other servers for the users at Corporate HQ to find it. Should we: a. Create a new Master AD Domain first as ATICORPORATE.COM and then upgrade our current Domain ATCNTD1 to Win2K and AD at the child level ATILI.ATICORPORATE.COM, keeping the Main Exchange Server Organization and Site at the child domain level. Also this change will be in Mixed Mode for some older Win 9X clients. Will our other locations be affected if we do this as their exchange servers replicates with ours and we have the Web Outlook box that relays all incoming/outgoing messages to our ISP. b. Upgrade our current domain (ATCNTD1) to ATICORPORATE.COM and then create another child domain and migrate our NT4 and Win2k Servers to that domain but keep the Main Exchange & Web Outlook box at the ATICORPORATE.COM Level. How will our older 9x clients be affected if we put the main exchange server at the ATICORPORATE.COM Level instead of ATILI.ATICORPORATE.COM. Thanks PrinceAli0

I know XP comes with the driver I knew that since beta 2 months ago when I installed it, what I was trying to say was install the latest and look at the performance increase, if you have a sound card giving a problem then this is probably a solution for you if you're using your HD on the Raid slots. Again I stress that only if you're booting of the drive that is connected to the raid slots. If you're HD boots off the VIA onboard IDE slots then you probably won't have problems with sound. Good Luck

If you are sure its ACPI Compliant then go into device manager and find the computer type, your current setup should say Standard PC, now select it and click update driver, go the advanced route to select a new driver from existing sets. Select ACPI Compliant PC or something to that sort, not the ones with extra details after it. Once you're done reboot, it will redetect all your devices again so have drivers ready on FLOPPY as your ide CD-Rom may not be detected yet. Thats it and all should be well. This process can go vice-versa too if you want to disable ACPI. Good Luck PrinceAli0

I installed it on my sony vio laptop and everything works fine, can you give a little more specs on your setup so I can get an idea on what might be causing this problem. Can you use the FN key if you boot to a command prompt using a dos boot disk, if you can us the FN Key for sound and brightness then the problem is with the OS if it can't be used then you've got a problem with your setup. If it is with your OS try going in device manager and changing the keyboard type, it'll allow you to search or select from a list (think its called advanced) and select the sony driver if one is available, if not just try removing it and rebooting allowing it to redetect the keyboard. Beyond that you might have to wait for driver support from sony. Good Luck PrinceAli0

Hey, Its the VIA southbridge that causes all the problems, just remember that. I'd be cautious and wait a little for the AMD 761 Chipset boards to come out with both north and south just for compatibility reasons as the VIA rigs have problems after problems and if you're going DDR the AMD setup is probably perfect for you. I currently own the KT7A-Raid, I like it but for someone who isn't willing to deal with too much tweaking and configuring the AMD route is the way to go. Just my 2cents PrinceAli0

Thanks Guys, I feel confident that nothing will mess up with the upgrade, as I do have a fully functional working OS right now. Even though I was one of those crazy types that have always done a fresh install cause I feel its better I didn't want to take the risk as I finally got everthing on my Athlon box working correctly. Thanks for all the great posts. PrinceALi0

First off do you have any hard drives on the ATA100 Raid slots, if so then proceed. If you never had the sound problem in any other OS, kinda like I did, then your problem is in your Promise UDMA100 drive. Try to find a beta or the latest driver for Win2k for that device, if you find one give it a shot, if there isn't any out, just deal with it for now or go back to Win2k till there is an XP driver out there. Hopefully this helps you a little. Good Luck PrinceAli0

Ok 1st nic lan network for sharing (clear all settings) 2nd nic has the pppoe DHCP connection (IP Automatically assigned) Remove any sharing information and setup. Now if you right click on 2nd nic in the properities page of "My network Place" and select create a new connection from the file menu, proceed with the on screen directions, it will automatically assign an IP to 1st nic for sharing and setup DHCP for all computers connected to the hub that 1st nic is attached to. Its not hard, if you have any trouble just ask. Good Luck PrinceAli0

Here is your solution, give it a shot. Also you don't need to have an account on any other machine, just share it for everyone if you trust people on your local network. ******************************************************************** Are your computers are in the same workgroup or domain (that is if you have a domain running at your home or office). If they are not then thats where you should start, the next thing is they should all have IP addresses in the same subnet, e.g. ip 192.168.1.x, subnet 255.255.255.0, gateway 192.168.1.x(whatever you want the server to be if you have one, should be able to leave it blank). Once the machines can ping one another they should be able to find one another in the start search feature and look for another computer. Once you find each other you should be able to see the shares on each machine. The next step would be to setup actual shares on each machine for others to view, you could just select everyone for the permissions so anyone in your home can get access to that specific drive or folder. Let me know if you need anymore help. Good Luck PrinceAli0

The other option would be to go to user manager in control panel and create another user this way it will prompt you for a login and password to use the pc. Good Luck PrinceAli0

Are your computers are in the same workgroup or domain (that is if you have a domain running at your home or office). If they are not then thats where you should start, the next thing is they should all have IP addresses in the same subnet, e.g. ip 192.168.1.x, subnet 255.255.255.0, gateway 192.168.1.x(whatever you want the server to be if you have one, should be able to leave it blank). Once the machines can ping one another they should be able to find one another in the start search feature and look for another computer. Once you find each other you should be able to see the shares on each machine. The next step would be to setup actual shares on each machine for others to view, you could just select everyone for the permissions so anyone in your home can get access to that specific drive or folder. Let me know if you need anymore help. Good Luck PrinceAli0

Try removing all customization to the parent folder, e.g. my pictures and all the sub folders, then reapply to the parent folder, that worked for me. Good Luck PrinceAli0

Are you sure your burner is burning the ISO images correctly, I had this problem once and the cd had like 20 bad files on it that couldn't be read. Try burning at a lower speed and see what happens. Good Luck PrinceAli0

Hey all is it possible to upgrade from RC1 to RC2. I've currently got RC1 installed and its finally working stable and now RC2 is out. Can I upgrade or will I have to do a clean install. Thanks PrinceAli0