tylau

USB IMO is a two sided blade, one is good for overclockers; no matter how you tweak your system, it still stays at 48MHZ speed on the controller at default, but when you overdone it, especially when you have an average PSU then chances are you would run into problems with it, try check this.

It ought to be the task of the display card, I am downloading the SP1 anyway, shouldnt agree more on its RTM status why take it so large to patch some software May be its time to upgrade my CPU

My installtion worked for me, when I went from a BX6 to a KT7A-RAID board, the HDD was recognised with the XP installed, just have to install the driver for the RAID controller, and every thing wents fine. HPT370 is supported in XP natively.

BUZZ of marketing are always flooding around, just like something called SBA

R u sure U r talkin about that mouse, and not that mouse

It depends on what you are going to use on a >512MB system with win9x, because 2 to the power 32 is the limit on some program.

Hope this is not off topic. I still havent figure out how to block those pop-unders, I have try explicitly defining rules to try blocking in personal irewall such as norton but fails; seems that they have not a fixed IP address. Please input your thinking, thanks.

Where can I found such a program for dial up twaeking on MTU/TTL, etc, in XP? I mean native XP support. Thanks.

But I am not sure if they can be gone clean when I dont need them any more...

Still downloading, but I have tried pop-up stopper 2.6 and winwash, still no luck, the hardest one to KILL is traffichome!? ;p

try enable the netBIOS over TCP/IP stack in win98se, default installations od 98 didnt turn it on, and 2k/xp failed to detect the machines.

Positive, I use to have netBEUI installed on w95 to work with 9X/2K, and this might be just another cure.

I know this is a bit oldie but I have to stick with what I have got present. I have diffculties connecting w95 v.1 machine with XP machine on a peer network, where can I found info on this topic? Does any piece of software is needed to install on the w95 machine to cater for the file and printer sharing with XP? Thanks.

On some IDE drivers I have used, putting in CD would make the drive scan for directory changes periodically. Even using fastfind is not ok.

Please recommend a HARDWARE based MPEG-1 encoder board, with TV/FM tuner on board, and must be work with Geforce2 in W2K/XP, possibly on the cheap side. It is not needed for me to edit with an AVI file nor do I need to have MJPEG thingy. I am really interest in making my box into VDR alike. Thanks very much.

try Cacheman d/l and you can get rid of paging file completely, but be warned that winblows sucks at times when do without it. U are warned!

What exactly is the difference between these tow seemingly identical mobos from ABIT, which they share the same layout, same BIOS and versions, same manual, allegedly the same VIA KT133A chipset. Thanks.

cool looking, I wont go Asus if I have to upgrade, they are not worth for what they have asked for in local market. Asus is cheaper in US/Europe than Abit boards, so how are they going to charge me for higher than Abit boards of similar functions. Thanks man again.

HOT off Abit website, nothing about onboard sound or graphics, it is a godsend if you can found any thing about KT133E on VIA website CPU Support AMD Athlon/Duron 700MHz ~ 1.2GHz Socket A Processors based on 200 MHz Chipset VIA KT133E /VIA 686B Memory Three 168-pin DIMM sockets support up to 1.5 GB PC100/PC133 SDRAM module BIOS SoftMenu™III Technology to set CPU parameters Multi I/O 2 Channels of Bus Master IDE Ports support Ultra DMA 33/66/100 Miscellaneous 1 AGP slot, 6 PCI slots and 1 ISA slot [KT7E] -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- AMD Socket A ATX Based Mainboard With Ultra DMA 100, SoftMenu™III Technology

Thats really screwy, it share every PCI/AGP device IRQ in your system, it makes no retreat of your likeings or not, it wont boot when you disable it if w2k installed with ACPI switched on, and it wont allow my system to install w98 when it switched off...real pain.

Where can I found (if any) sound card with hard ware support for the Office XP speech recognition? Or at leat something with driver implementation in their sound card, so that I can ditch my SBliving dead. Thanks.

Be really careful, your MX400 and system is going to be in jeopardy when that NT CICERO loader CTFMON.exe is load and it basically hooked up all I/O devices in your system through a dll file, be very frighten!

eXposed Privacy, definitely exposed, winblows over and over again! Are you having fun in being loyally-screwed by an "official" backdoor?

Among the first few things I will do on a final installation of XP is to disbale and throw it out of scene for as long as I could. What this is up to, makes its tiny benefit far outshadowed by too many potentially fatal threats.

Blazingly fast and highest quality, never was a problem in any mode, free of any 3D hassles, you wont get better. You will never know what CPU I use