Cordless

dear knowledgeable ones, I have had to fdisk my primary partition since it died on me last week, however, along with the fdisk went my boot loader for 2k server. I have tried to do a repair but the installer won't find 2k and I have lost the emergency disk. Is there any way that I can restore my 2kserver installation without loosing all the data on that partition?? I have about 200MB free on the NTFS partition. thanks Kim

er............guess what I have??!! yup a PII 233! and 64MB Ram!! and guess what I;m running?!???! yup - w2k advsvr! confused??? yup me tooo!!!

are hardware modems still made or are they all software ones now?? can anyone suggeest a hardware voice modem? (ie speakerphone)?? cheers

actually looking for a internal one really, any other suggestions??

anyone?? going once... going twice....

I have the option of either a AWE64v or a SBPCI 128 obviously the 128 is based on newer technology but the midi synth output seems to be poor. can anybody shed any light?

euan..........my cards are SB AWE64V and an SB PCI128 do your comments apply to these cards are you saying I should stick with the PCI card as opposed to the older ISA AWE64??

I've recently re-installed Windows98SE and now my system logs on automatically to the default profile. It now longer shows the Microsoft Netowork Logon box - anyone know how I can get this back?? it is quite frustrating TIA CL

ooops.....sorry forgot I was asking about win98 I'm ust sooo impressed with the knowledge and helpfulness of people on this board that I was sure there was someone with the solution. Thanks for the answer (I'll try it tomorrow) and sorry for the 98 post CL

anything to do with the dreaded undercurrent problem that plauged certain Asus boards?? or the funny memory slot problem that the p5a had?? old news but just a thought

Hi is it possible to use both ports on a lan card (I'm using a realtek 8029) ie: I have 2 machines networked by 10baseT with a crossover cat5 cable. can I add another machine by using a BNC cable attached to the connector on the 8029?? cheers CL ------------------ Dual PII233 @ 525 Matrox Mill II 4MB aGP Creative 12MB V2 UW SCSI, 230MB RAM

my bios is also acpi compliant however I installed win2k and it went MPS by default. re-install and when it prompts to press f5 to list alternative scsi controllers press f6 and set you machine as a acpi pc HTH CL

2 options: 1: non-destructive, Partition Magic 5 2: Destructive, fdisk (selecting "no" to large disk support) HTH CL

not quite sure what the joke was????

I'm getting exaclty the same with both my IDE hdd's on the primary channel any ideas I'v be most grateful of a line: unsaferemoval@RKimTan.co.uk TIA

So Are you sorted now??? mail me if not

I think the cubase website shows that none of the CL cards are really suitable for use with CB

I've been using winroute now for a couple of weeks and it's sweet set up a network with private IP's and install winroute - choose your ISp from the maintanance box and voila I've never seen a smarter piece of software I'm a convert from wingate anyway give it a go www.winroute.com

try adding a interface manually by going to settings>advanced>interface maintanance

I think Belkin make a USB direct cable connection cable - this may work and will obviously be faster than serial - given that both machines have usb ports

are you running a beta version?? I had the same problem with 2183 UG to 2195 and all in hunky dory in the land of nod

Hi peeps - maybe someone can help me out here with an "idiots guide" preferable to Support@RKimTan.co.uk I have a Win2k Adv Server 10.10.1.1 255.0.0.0 connected to the www by a v90 modem (soon to be adsl) this also acts as my DHCP and DNS server. my clients are win98 and obtain addresses from the server in the range 10.10.1.3 to 10.10.1.255 basically I want to be able to get the clients browsing the net - ICS is out of the question since it assigns the addy's 192.168.0.1 etc and it doesn;t work with DNS and DHCP servers anyway - so I'm assuming I need to set up either NAT or IP Routing - does anyone know how to do this - I don't particualry want a dial demand interface - I want to be able to connect the server manually and then let the clients browse TIA Kim

I'm getting the infamous "at least one service or driver failed on startup" I check the registry and I think it is "The Remote Storage File Hung On Startup" anyone know how to fix this?? TIA Kim

is it possible that is has something to do with this file being missing? E:\WINNT\system32\RemoteStorage\Trace\engine.trc

anyone else fancy a bash at this?? ------------------ Dual PII233 @ 525 Matrox Mill II 4MB aGP Creative 12MB V2 UW SCSI, 230MB RAM