pr-man

what problems does XP have?

?

is there a working Liveware for XP?

Ok I did a fresh install of XP and installed the latest XP drivers off this site and also the 7.2 media center. If I tryo to run 3dmark2000 I eiether get a black screen and have to reboot or I get a graphically messed up screen and lockup and have to reboot. HELP please. I have agp4x on in my bios and my T-bird 1 gig is at 1.4 but this worked fine for my previous card. my card is a OEM ATI AIW Radeon 32 meg DDR agp so its not a 8500. I am using the 6.13.3276 drivers off this site and ATIs. Also if I clock down to 1333mhz and install reference drivers from ATIs site, I can play max Payne (but get little red dot artifacts all over the screen) but 3dmark2000 and 2001 both crash to desktop or lock. Please help me I want use this card. What I dont understand is that I have a Matrox G550 before and could run my system at 140x10.0=1400mhz and agp4x and no problems Ok its almost like the card is overheating but when i touch the heatsink on the card its cool. After running 3dmark2000 for about a minute I stat getting little artifacts all over the screen. and then i get kicked to the desktop and my whole screen gets distorted. Now i am at 1333 mhz right now. it makes no sense that the card is so wimpy that I have to run my t-bird at stock 1 gig, and every other card I have ever used I could run it at 1.4 (140x10) any ideas

Crazy take a look at these posts and it will give you more info ok check my posts out and you will understand http://www.rage3d.com/board/showthread.php?s=&threadid=33594629 http://www.rage3d.com/board/showthread.php?s=&threadid=33594456

I have a Epox 8K7A (without the raid so no highpoint drivers) T-bird 1 gig @ 1.4

I hear conflicting opinions

Thx

Ok Can anyone help me or not? Thx

ANYONE?

Any Ideas?

Anyone have the old files that worked? please email them to me ellandry@bellsouth.net

damn

During the install I chose NOT to install directcd or TakeTwo. Dont know if that matters. HELP

Hey Blade I tried that and no go. I used to be able to get it to work before they changed the install procedures. I think that new file is screwing thjings up

Yeah thats the board, but I dont see any XP drivers on Epoxs site

well it crashes alot and half the time either cant find the required codec or has the codec but just plays the sound LOL

I get feedback sounds through the speakers while the HD is running

well any that play mp3, videos etc

Ok I have my system overclocked for the past couple of weeks on XP at 133x10.0=1333 with no problems at all. Now I have formated and freshly installed XP im getting wierd errors when I try to install anything from any of my cdroms. It says that the program is not win32 compatible or something. Or when i try to install something off the cdrom I get a hard lock and have to reset. Now if I install something off of the HD it works fine. I have not installed an via drivers since I know that XP has all of that. can you guys help me out? Here is my IRQ list. Also I have a promise ata-100 card in the system. so my drivers are setup like this IBM 75GXP 45 gig ata-100 on IDE1 on Promise set to master WD 20 GIG ata-66 on IDE2 on Promise set to master.(this one just shows up in XP as disk drive dont know why) Philips CD-RW on IDE1 on mobo set to master Toshiba 6x DVD-rom on IDE2 on mobo set to master System Information report written at: 12/5/2001 9:47:35 PM System Name: ELLANDRY [iRQs] Resource Device Status IRQ 9 Matrox Millennium G550 OK IRQ 14 Primary IDE Channel OK IRQ 15 Secondary IDE Channel OK IRQ 10 VIA Rev 5 or later USB Universal Host Controller OK IRQ 10 VIA Rev 5 or later USB Universal Host Controller OK IRQ 10 SpeedStream 3060 Miniport ATM/ADSL Adapter OK IRQ 11 Creative SB Live! Value (WDM) OK IRQ 11 Promise Technology Inc. Ultra IDE Controller OK IRQ 0 System timer OK IRQ 1 PC/AT Enhanced PS/2 Keyboard (101/102-Key) OK IRQ 4 Communications Port (COM1) OK IRQ 3 Communications Port (COM2) OK IRQ 6 Standard floppy disk controller OK IRQ 8 System CMOS/real time clock OK IRQ 13 Numeric data processor OK IRQ 12 Microsoft PS/2 Mouse OK

does the corporate 7.6 edition intergrate into Outlokk express 6 to protect from ewail viruses?

I think I fixed the problem but I would not have guessed it. I had both my cdroms plugged in with ata-100 cables to the motherboard. I am guessing that unlike ata-66 cables, ata-100 cables are not backwards compatible to ata-33 and thus were causing problems. Since I have hooked the cdroms up with ata-33 cables no errors or lockups.

Im looking for numbers in 3dmark2000 and 2001 running XP pro

Ok I have a T-bird 1 gig @ 1.33 on a Epox 8K7A with 256 megs pc2100 DDR and XP pro Problem is when i leave my system running overnight downloading some stuff over dsl let say. When i move the mouse in the morning to bring the screen back up the system is VERY SLUGGISH! Here is a listing of my IRQs so you can see what hardware I have. As far as HDs go I have 2 one IBM 75gxp 45 gig ATA-100 7200rpm and a 20 gig WD ata-66 5400. Both HDs are on seperate IDE ports on the Promise controller. My DVD-rom and CD-rw are on seperate IDE ports on the mobo. Any ideas guys? Does XP still have memory leaks like ME did? System Information report written at: 12/3/2001 10:50:31 AM System Name: ELLANDRY [iRQs] Resource Device Status IRQ 10 Matrox Millennium G550 - English OK IRQ 14 Primary IDE Channel OK IRQ 15 Secondary IDE Channel OK IRQ 5 VIA Rev 5 or later USB Universal Host Controller OK IRQ 5 VIA Rev 5 or later USB Universal Host Controller OK IRQ 11 VIA AC'97 Audio Controller (WDM) OK IRQ 11 SpeedStream 3060 Miniport ATM/ADSL Adapter OK IRQ 11 Promise Technology Inc. Ultra IDE Controller OK IRQ 0 System timer OK IRQ 1 PC/AT Enhanced PS/2 Keyboard (101/102-Key) OK IRQ 4 Communications Port (COM1) OK IRQ 3 Communications Port (COM2) OK IRQ 6 Standard floppy disk controller OK IRQ 8 System CMOS/real time clock OK IRQ 13 Numeric data processor OK IRQ 12 Microsoft PS/2 Mouse OK

i use edonkey2000