wallaby

I have no idear who you are! And I could realy care less Is it not great to be a nobody from your message you sure think you are somebody. Wallaby

I have no idear who you are! And I could realy care less Is it not great to be a nobody from your message you sure think you are somebody. Wallaby

Good luck lexmark could care less about most of use. there is a hack for the 3200 using the nt4 drivers that some people have been using to get there lexmark printer's running. it was a message called "Lexmark 3200 and Win 2K" not sure if its still up on message board. also try looking in the compatible hardware under lexmark 3200. some people have reported luck with this hack on other lexmark modles. anyone remember the hack? if its usb i think your out of luck Goodluck Wallaby

I have this same problem. i fixed part of it install the thrustmaster control panel for the top gun. this control panel will not work so uninstall it from add/remove programs. now go to your joystick control selector in windows. know you will see the trustmaster joysticks on the selections list. all buttons work on my joystick and the trottle control to. the pov still does not work. i think this has to do with win2k you dont get the option to cal the pov when your cal'ing the joystick. goodluck i hope this helped you. Wallaby

if your using unreal tornament i had to change the video device and next time i started UT no direct 3d device showed up. then change the selector to show all devices and select the direct 3d device UT then looked at my system and found my nvida card and asked if this was the derect 3d device i would like to use.

The pov hat on my joysticks will not work. using the 2 axis 4 button pov driver in win2k. when i cal the joystick it never does the pov hat. Is the generic win2k drive not working right? Thanks Wallaby

i use a sb16 (isa) with a scsi cont. i have no problems. you need to set your bios plug and play option for the irq used by the sb16 to leg/isa only. so only the sound card gets the irq. i use irq 5 for the sb16 and irq 11 for the scsi bilt into the sb16 this is set by junpers on the sb16. when installing win2k pro it auto detected my sound card but not the game controller and the scsi cont. had to add them in maualy. use generic game controler the creative game control will look like its working but be unable to find any jotsticks. or just go out and get a awe 32,64 they work just fine and sell for like $20 oem. Good luck Wallaby

the only way i found was to go to your favorites dir and make the from icq dir a hidden dir. Any other ways to kill this anoying FETURE? Wallaby

You think abits bad there sweet compared too diamond and lexmark at least you hear from them and there makeing progres haveing to deal the hpt66 controller thats not theres. diamond and lexmark still have no driver out for my hardware in windows 2000 and all there web site says is diamond's drivers will be releast as soon as win 200 is realesed well??? lexmark is we dont support that (basicly to bad you should have got a printer from a company that cares) no beta software or event news report and they just dont return my e-mails joy. so you see you dont have it that bad with abit they talk to use they fix it if its broke. there giveing use bata's for temp fixes. yes some thing have draged on but the work arounds have been ok. so chear up life is always the hardest game to play we are still on vertion 1.0 and no patches on the chalk board that we know of! Bye Wallaby Bad spelling late at night some of my best work.

mite it be you sound cards what are you two using? maybe theres a like. sorry i dont have M&M 8 but i was going to get it. Davidian did driven fix help you? Wallaby

i am able to run that real old game nukewar thats a old dos game. still kind of fun. Wallaby

finaly my diamond viper v770 ultra will run ut in full screen i had to play in a box on all the other vertion on nvida drivers. well its not like i will see any drivers any time soon from diamond. but yes i think the new driver run great.. Wallaby

doeas anyone have WriteDVD for windows 2000 by http://www.softarch.com/? it will do dvd-ram packet writeing under windows 2000. how is it? what eles can it do cdr's? i would like to get my dvd-ram up and running is this a good programe or should i wait for vob http://www.vob.de/us/index.htm new instantwrite software to come out. that will do cdr's and dvd-ram's. i would like a one product solution to my rewriteable drives paket writeing problem. If you have WriteDVD will it do paket writeing across the board cdr's and dvd-ram's or just the dvd-ram? it wouls seem like a wast of code if they already have it working for the dvd not to put in cdr to.

simon i had the same problem when i went to 4.0 its all adaptecs fault they stoped supporting my older cd-rom reader it was a toshiba 12x scsi cd-rom. it would work perfect in 3.0 but 4.0 would not let me copy at any speed had to copy to harddrive first. i had the same problem with my toshiba 4x scsi cd-rom when 3.0 came out. do you see the trend adaptec hates toshiba. toshiba is not even listed on there compatible page anymore. my fix was to get a new reader a toshiba 4.8x dvd 32x cdrom. ya i know a toshiba again but at the time they where the only ones makeing scsi dvd drives. Wallaby by the way never try to get new firmware from toshiba. the drives are flashable but they make you send in your drive and wait 6-8 weeks when they could just e-mail you the file and you do it in five minutes.

evil homer you have DIRECTCD working in win2k? if so how did you get it to run? i miss this program. i have easycd creater 4 deluxe and well it sucks in win2k. deluxe 4 will not let me copy cd's from my toshiba scsi 12x at any speed but it tests the drive as good upto 12x for copying. i had this proble before with my toshiba 4x scsi when creater 3.0 came out. i think adaptec hates toshiba. i went back to easy cd creater 3.5c its always worked perfect for me. Wallaby Quote: Originally posted by evil Homer: I've just installed the deluxe update, but didn't reboot because I was working on something, so I checked out the forum, and started to panic when I read that people couldn't restart. So, after my download finished, rebooted... and everything worked fine. I had the Win2k ASPI layer installed, and the hacked DirectCD 3.0. Just thought I'd add that to the mixer. evil Homer

creative is not bad for support look at diamond i dont think they even have planes to put out drivers for win2k. all there website still says is will be released by win2k release date. ya write i will by that bridge to. Wallaby

da da da da beet beet beet da da da (wistel) da da da. Wallaby

the ultra is tweaked to run overclocked on its internal clock speed is much faster then the non ultra's thats all i know dont touch the diamond there support sucks still no driver not event betas. i traded my 770 ultra in for a ati rage fury it works perfect in win2k fullscreen games and all Wallaby p.s. dont take my word for it uses your own mind look at there website and search this site for diamond or 770.

ow come on some more of you must be using joysticks and seen this problem. or at least give me some clue and tell me your pov is working fine in windows 2000. Thanks Wallaby

my 2 cents my diamond v770 ultra does not run perfect with any driver. unreal tournament will only run in a box it starts up switches to full screen real fast then back to a windowed mode. but with the new 3dfx voodoo2 hacked driver i use 3dfx and UT runs great in full screen. Wallaby

So far the support from Diamond and Lexmark about win2k has sucked no updates they stoped answearing the phones and e-mail. I purchased a ati video card this weekend at least they give updated reports and beta driver till they get the full vertion of the drivers out. My lexmark 7000 is still a paper weight. looking like no fix in the near future. Sorry had too just say that as nice as posible Wallaby

Any abit board using the hpt-66 drivers for there udma 66 get the stand by,hibernation disabled. abit is working with hpt to fix this. check the readme for the udma 66 drivers. read the abit "BP6,Win2k and APM" message its expressed in there by different abit boad users. Wallaby Quote: Originally posted by Mr.Win2k: The topic say's it all!!! What should I do?? Should I change something in the BIOS? Please help me! I getting really pist off! [This message has been edited by Mr.Win2k (edited 06 March 2000).]

Yes you can with the new beta bios QQ-2 which tou can find at http://www.bp6.com. If you do not wish to load a beta just go back to mps 1.1 till the full vertion bios comes out. this will fix the error you see on the usb hardware. The new bios will also give you your power management back (shstem will shutdown when exiting) You will need too reload win2k clean or over it's self using the repair option too keep all your settings. Third party driver not certifide will be lost and need too be reloaded. There is a shortage of usb device driver for win2k you may have to hunt alot. this is one of the best places i found to start looking. GoodLuck Wallaby Quote: Originally posted by GReYHouND: Hi there, Just a quick question: Using a bp6 board and setting mps to 1.4 in the bios and running w2k is it possible to use the usb? Thank in advance! GReYHouND.