ThomasMc
Members-
Content count
10 -
Joined
-
Last visited
Never
Everything posted by ThomasMc
-
For more info. on installing Windows 2000 on you IBM Thinkpad 600X go to http://www.pc.ibm.com/support and use the following Doc. Id. in the search box. 600X - Installing Windows 2000 onto a blank hard disk drive...MIGR-4GXL5N 600X - Upgrading to Windows 2000 from Windows...95MIGR-4GULS3 600X - Upgrading to Windows 2000 from Windows 98...MIGR-4GUQVB 600X - Upgrading to Windows 2000 from Windows NT 4.0...MIGR-4GUPZ8
-
You may need to do a low level format of the hdd. Take a look at IBM Storage Web Page and "play" with DFT downloadable form http://ssdweb01.storage.ibm.com/techsup/hddtech/welcome.htm
-
For more info. on installing Windows 2000 on you IBM Thinkpad 600X go to http://www.pc.ibm.com/support and use the following Doc. Id. in the search box. 600X - Installing Windows 2000 onto a blank hard disk drive...MIGR-4GXL5N 600X - Upgrading to Windows 2000 from Windows...95MIGR-4GULS3 600X - Upgrading to Windows 2000 from Windows 98...MIGR-4GUQVB 600X - Upgrading to Windows 2000 from Windows NT 4.0...MIGR-4GUPZ8
-
I'm having the same problem. Win2K picks the scanner up as a Umax 1220P. using this drive has no effect. Has anyone else had this problem OR know of a workaround. Thx.
-
The Windows 2000 CD is bootable. Why not use it ?? OR You could boot off a Win95/Win98 boot disk and run the "x:\i386\winnt.exe /makelocalsource" where 'x' is your cd rom drive letter. let me know if this works.
-
What SP are you running ? Do you have a NIC card installed ? If the card is AGP you will need to be at SP4 or higher
-
Quote: Originally posted by prum555: Has anybody been able to setup SYQUEST SPARQ parallel port attachment in W2K? I tried the advise from NT Compatible H/W compatible section but I am lost! :0 I could not find the EPHDWNT.MPD file from ShuttleTech. Also there are a lots of places in SYQUEST.INF refer to SHARSHTL.SYS, do I need to comment them all out? Any help to get my SPARQ working is appreciated. Thx. I have managed to get a Sparq PP Drive working under Win2k. But only doing an upgrage. From Win95/98 or NT 4.0. I could not get the drive to work after a clean install of Win2k onto a blank hdd.
-
Quote: Originally posted by yakko7178: Hi, I'm running Win2k Server on a computer here at work (trying to get it to work as a backup for our NT4 PDC, but that's another story). This computer has a SCSI CDR drive that's worked great under NT4 Server, but EZ CD Creator won't install under 2000. Does anyone know a fix for this? (please don't tell me to get X CDR software or X is better unless it's freeware, EZ CD Creator is what my company paid for, so it's what i've gotta use) thanks! Jeremy Dennis Take a look Nero. http://www.ahead.de
-
Quote: Originally posted by ventallo: I've PII 266 with pl97 Asus and when i had Win98 the Pc shutdown ok (Automatically) but now the shutdown is manually.Why is it? Can i change my current chutdown? Thanks. You could try this.. Go to Start -> Run -> msconfig -> advanced -> put a check in the box for "Disable Fast Shut Down"
-
Quote: Originally posted by Assassin: why can't w2k go into suspend mode? Is suspend enabled ? Cheack this in control panal under Power. The same way you would in Win9x. Is you System Board ACPI Complient ?