tristan777

forgive me if this has already been covered on the forum but i didnt see it. this problem started a few days ago, and i CAN NOT get it to go away. i get static and weird popping type sounds whenever i have winamp running in windows and all the time in games. whenever i scroll in a window or do pretty much anything(mimize,minimize, close, any normal navigating of the os) i get static type noise and popping and squeeking sort of noises. in games it happens all the time. throughout the entire game, no matter what i am playing. well i have tried reinstalling the drivers several times, and i have tried reinstalling a few of my games and the problem still persists.... i'm not sure what caused it in the first place since it just started out of no where. i didnt install anything new or do any other modifications. if anyone has any ideas i would really apreciate your help. here's my specs: amd k6-III-450 with via chipset(i also just installed the inf update earlier today which seemed to do nothing.) sb live! value w/ liveware for win2k viper v770 ultra w/ detonator 5.13 wd 13 gig hd 128 meg of ram i also have a cheap isa 56k modem, 48x creative cd-rom, and a netgear 10/100 nic, but i didn't think that stuff would be part of my problem. thanks for the help.

grrr... this will b the 2nd time i've typed this message. power flickered and i lost it all... anyway, i've got a strange problem in winxp that happens whenever i try to play a game with my vid card overclocked AT ALL. the screen will go black and colored lines will flash accross it all over the place. this does NOT happen though when running benchies such as 3dmark, etc. also i never had this problem in winme/98 b4. i thought it might be a driver issue, so i tried switching drivers, and reinstalling current drivers, but neither worked. so im wondering if any of you have a solution, or if anyone else has this same sort of problem at least... the problem occurs if the geforce is overclocked at all really in games, but i can get it decently high in benchies no probs. (done about 245/465 stable) anyway, here's my specs: Tbird800@963MHz (107x9) Asus A7V rev. 1.02, bios 1003 modified w/ newer ATA100 bios. 512megs OCZ PC150cas2 @ 143 MHz or so 2-2-2. 30 gig WD 7200 rpm ata100 drive... i've got a 23 gig partition and the rest i left unpartitioned in case i wanna put another os on it later. Leadtek Enhanced Geforce2Pro sb live! value lucent winmodem Dlink pci nic, cant remember name. that's about it i think. o yea, i'm running xp rc2 and i've tried a few different dets. 14.40, 12.90, and 14.20 or 14.10. whichever 1 is the win2k one. cant remember. it happens with them all though. thx for any ideas... heh on a side note i was suprised i remembered my nick for this board. it's prolly been 8 months to a year since i last posted here. i havent ran win2k in a looooong time. 1 more thing. b4 anyone says i need better cooling, let me just say that i've got 4 80mm case fans. 2 on side, 1 in front, 1 in back. i've got a globalwin fa420 on my gf2pro w/ a 40mm fan on that. i've got a 40mm fan off an old 486 cooler on my northbridge, and i've got 2 60mm fans stacked on a FOP32 on my Tbird. i used arctic silver epoxy on the geforce w/ a little AS2 mixed in incase i ever wanna get it off. i used Arctic Silver II on my tbird HSF.

i use nvmax. actually i post news and moderate the forum at nvmax.com as well. i dont like powerstrip, because u gotta have it running to keep the overclocking settings i believe... since it goes through hardware rather than drivers.

the best tweak i've found is NVMax. if you haven't heard of it, it's a tweaking for Nvidia cards. it requires u to use the reference drivers, but these are usually the best anyway. i would highly suggest downloading it if you have an NVidia based card. it supports 9x and 2k. also stop by the forum sometime. there's lots of helpful ppl there. [This message has been edited by tristan777 (edited 19 December 2000).]

hello, well last night i changed the HSF on my tnt2u because the default fan quit working. i put a socket7 HSF off my old k6 on there in place of it. i spread thermal compound on it and put super glue on the 4 corners of the chip to attach the heatsink. the back of the card, above the core, seems cooler than it was w/ the default heatsink, so that's why i dont think this was heat related. also i didn't see any artifacts or color changes before it froze. anyway here is the BSOD i get: STOP: 0x00000041(0x00001000, 0x0000041B, 0x0000BE6, 0x00000000) also that B might be a 13, i can't read my own writing. MUST_SUCCEED_POOL_EMPTY i get this on the 64 meg texture test in 3d mark if i overclock the card more than a few MHz. the default setting is 150/183. at 155/190 it runs fine. but at 155/195 it crashes, though i used to be able to oc the memory to 200 fine w/ no crash. here's my system: thunderbird 800 on Asus A7V(latest bios) diamond viper v770 ultra(detonator 5.30, fastest for me) sb live! value netgear 10/100 nic lucent winmodem 128 megs pc-100 cas2 ram 13 gig UDMA33 WD hard drive, 7 gig win2k, the rest 98 though 98 isn't running correctly, haven't got around to reformatting it hmmm... thats about all i can think of. thanks in advance.

i supose i prolly should reformat. hehehe... i just figured it might be ok since my old board had a VIA chipset too. o well. now i just gotta get some cds...

hmmm... well my card still does fine at it's default, just not faster. i'll try oc'ing again after i reformat. if it still does it, i guess i must've just hurt the card.

hehe. o yea. i fixed my UT problems. don't know how. it might have been DX8 or my last bios update. but i played for about an hour today in Direct 3d and it didnt crash. hmmm... last time i reformatted my computer was in april or may. so 6 or 7 months? at that time i was running on a K6-3-450. hehehe... maybe i should reformat. i'm getting some more cds tomorow so i'll be able to backup my stuff first. this ram is actually PC-100 CAS2, but right now it's running at PC133 in either 3-3-2 or 2-3-3. can't remember which. it did this in PC100 CAS2 and PC133 how i have it. i made sure not to let the HS touch anything else but the chip. it hangs over a couple of the ram chips just a bit, but it doesnt touch them. i was trying to put off reformatting because i'll probably be getting a 30 gig seagate ata100 drive. i was going to put 2k on that one, and 98 on this one since i'll just use 98 for emulators and such. i supose i could try my card in another computer i have. i dunno if it will fit though with this heatsink on it. it needs 2 free slots below it. anyway, thanks for the help. could overclocking my memory before to 210 have damaged it so that it won't overclock as far anymore?

i changed my ram to pc133 cas3 yesterday btw. anyway, i need more ram just to overclock my video card? grrr... might as well just buy a new freakin vid card then. hehe... i have SP1 and DX8 btw. this happened before and after i updated to DX8. but when i was overclocking my card w/ default heatsink i didn't have SP1, and i didnt get that crash.

i used to have an mvp3, and i never did get udma working in 2k... i tried about everything, but i couldnt get it. i think got an Asus A7V(kt133) a tbird 800 and it worked fine w/o even reformatting. hehe

i'd go w/ AMD. you shouldn't have any problems w/ AMD or VIA w/ a good KT133 board. if i were you i would probably wait for a DDR board to come out tho. i think they'll be out pretty soon...

i had the same problem here, and i have dx7. i think it might be SB live! related.

i would go with the Asus A7V. also for the HSF get a Globalwin FOP-38. nearly everything i have read says this is the best Socket-A HSF money can buy. i'm going to be getting one for myself to replace the one i have, and trust me these things put out alot of heat so u want a good HSF. Processor is really up to you. if your wanting to OC alot then obviously go with the duron, but if u want the best performance go w/ the Athlon. also, i'm not sure about the KT7, but i know that the A7V can handle a FSB speed of up to 145 MHz and maybe even higher but this is the highest setting in the bios. just something to think about. [This message has been edited by tristan777 (edited 26 November 2000).]

nvidia's drivers don't suck. they're a hell of a lot better than most other companies. for Nvidia based cards, or even their own damn cards. (ATI) but anyway, all the drivers after 5.xx are really just for geforces. they aren't going to spend anymore time up[censored] drivers for legacy hardware. it makes sense to me....

i'd guess either the card isn't pushed in all the way, or the card is bad. that's really the only thing i can think of that would make it not show anything. can u hear ur hdd spin up or ram count or anything? if not i'd be worried about ur mobo...

i'd use the 5.xx detonators if i was u. i've found them to be the fastest and most stable for tnt2s.... unless your running win9x, then the 2.xx drivers are faster i think...

hummmmm.... does that drawguns 0 command make the guns dissapear? yukky... i think i'd rather know what i was shooting and take the few FPS hit. i'm gonna get that bios update and see if maybe it will clear up all my damn d3d problems... [This message has been edited by tristan777 (edited 24 November 2000).]

i don't really understand why u called this thread "good bye 3dfx" or whatever. it's not like the company is gone. i think this is a step in the right direction. the voodoo2s owned, but ever since the voodoo3 they've only been second best. maybe some other companies will think of a something better to do with 3dfx's chips than making a graphics card with 196 SLI chips on it. hehe. inferno- my t-bird 800 coupled with my Asus a7v doesnt crash. my friend's P3 on the other hand... hehehe... btw, this is kinda off topic but have u guys seen the "Geforce2 GO" or whatever? the laptop chip? man, that thing kicks ass. u might actually be able to game on a laptop once those are released. that would be nice to just be able to take a laptop and a monitor to lan parties and such...

i get that same error if i overclock my tnt2u. do u think it could be caused by heat? i always just figured heat would make it freeze right? or do u think it's software related? unoverclocked i can play quake3 forever, but if i overclock it to 170/205 it gets this error after about 10 minutes or so of looping a demo.

i dunno i was wondering the same thing, but i have the latest bios, and i still can't get the secondary channel to work if i put both of my CD-ROMS on it. i have a 4x4x24 HP CD-Writer and another 48x cd-rom. currently the 48x is on my primary ide channel with my hard drive and the cd-writer is alone on my secondary channel. when i put both of the cd-roms on the secondary channel it doesnt detect my hard drive on the first, and it only detects my cd-writer on the second. that was probably the most confusing thing ever written, but if anyone can decipher it do u know how i could fix it? thx, -tristan

hey, u talkin about starband right? i got that beta as well. but i couldnt get it to work on win2k. it would work every 3 or 400th time i installed it until i restarted, then it would quit working. i put it on my 98 box, and it works fine so far. i haven't networked them though. i know theres gotta be a way to do it w/o the usb, cuz it's got a cat5 port on the back of it. havent figured it out yet thoguh...

i want to know where u got pc-150 ram? i've never heard of such a thing. anyway, i don't have any problem in 3d mark, but in UT i do. i have an A7V and tbird 800 as well. i dont know, but i dont think it's the A7V. i've heard similar problems with other kt133 boards as well. it just seems that i hear A7V more often, since it's probably the most popular.

well whenever i run UT for more than a minute or so, it freezes. i can still hear the sound, and the music playing and stuff but the video freezes. at first i thought my video card was getting too hot so i unoverclocked it and even tried taking it out of AGP 4x mode, and it still freezes. but i can run Quake 3 or half-life for hours, and neither will freeze. so i dont think it is a cooling problem. i have the latest patch for UT, and i am using the Detonator 5.32 drivers as they gave the best performance and stability for my card. here's my specs: T-bird 800 on Asus A7V(VIA KT133 chipset) latest bios flash 128 megs PC-100 memory TNT2Ultra w/ Det 5.32 SB Live! value Lucent 56k winmodem Netgear 10/100 nic 13 gig WD HDD(UDMA33 7.2 gig win2k partition, the rest win98) thanks, -tristan.

how much u wanna bet Ledzeppel either: A)has never played Q3A or UT or B)works for the CS development team i swear, everytime Quake3 or UT comes up, he always has to say "Counter-strike is the best game ever." he already said he plays half-life ok? jeez... note: i'm not saying counterstrike is bad, just that i find ledzeppel annoying.

i had the same problem except mine always restarted rather than just showing the "Turn ur computer off now" screen. did that with my old mvp3. is that by any chance what ur board is based on?