smokinkane

I'm a member here, but have heat in the hardforums, and 199 100% positive feedbacks on ebay under smokinkane. Ok I'm selling some of my best equipment so that I can upgrade to a conroe setup. All prices will include shipping. I will accept trades for items that would go to my new build like: 7900gt, 2x1gb DDR2 800mhz that overclocks really well, Asus's new 975x conroe board, etc. Here we go: Compaq x1000 Laptop [size:5]600.00[/color] lower price Windows XP HOME 1.5ghz Centrino 512mb DDR 60gb Seagate 5400RPM hard drive (new) 15.4 inch Widescreen (no dead pixels) ATI Radeon 9200 64mb CDRW/DVD drive Intel 802.11g minipci card (new replaced the .11b card) New Battery Microsoft Intellimouse Explorer included Targus Case included This laptop is in pristine condtion, works excellent. You can even game on this unit, it will run most games. I paid 1,500.00 for this laptop less than 2 years ago, and it is still build on great technology. I'm selling it because my workplace bought me a new laptop that I can use at home and work. Motherboard, Processor, & Ram combo: Albatron PX865 PE PRO II motherboard with most all the original retail boxed items. This board is a s478 intel 865 chipset board with PATA Raid and SATA raid, which is a great feature. It overclocks really well, and I have this combo clocked at 3.4+ghz this is on a 2.4c P4. As you can see the processor is a retail 2.4c and runs stable at 3.4+ghz, I have 2x512mb OCZ pc3200 DDR that are running DDR 500 speeds as I type. So if you purchase this combo you should be able to run it day in and out at 3.4ghz. Asking [size:5]320.00[/color] for the combo, but will part it out if I can secure buyer for everything seperate. Biostar M7VIG Pro with Athlon XP 1800 Palmino and 256mb DDR 333 [size:4]65.00 shipped[/color] Intel socket 370 815 chipset board and P3 1ghz 384mb pc133 [size:4]55.00 shipped[/color][/color] PNY Geforce 6800GT AGP 256mb I'm asking [size:4]135.00 for this card[/color] 2 Western Digital 80gb SE hard drives (used in PATA RAID 0) 80.00 for both 10 Western Digital 8.4gb hard drives 12.00 shipped each or 5 for 40.00 2 Seagate 8.4gb hard drives 12.00 shipped each or both for 20.00 3com 905b 10/100 network cards 6.00 shipped each Netgear fa311 10/100 network cards 6.00 shipped each Need a generic agp card 8.00 shipped each HTPC- Antec HPTC Piano Black Desktop Case Asus CUSL2-C, 512mg Kingmax pc150 SDRAM, P3 1ghz, ATI Radeon 9600xt, Pioneer DVD player, 2 IBM hard drives 30gb and 60gb. Those are the basic specs, I would like to trade this system for a Xbox 360 and I will either post a little cash or some of my other parts listed or not. If you have an Xbox 360 for trade PM me. Just PM me if you are interested in something, or to make an offer. Thanks

Ok I have quite a collection of stuff that I need to part with, I would like to sell most of it but would consider trades for: bluegears sound card, or the new company that owns that technology, need a good sound card with coax digital out 5.1 or 7.1, or maybe a decent Athlon XP/mobo combo,tualitan/mobo combo, or p4/mobo combo. I don’t really need anything else, oh and I’ve been a lurker for awhile and if you want to check out my ebay id is smokinkane. I have 175 feedbacks 100% positive, so no need to worry about getting your item. All parts are considered working unless specified, all parts are as is no warranty, prices are nogotiatable best offer will sell. Prices are SHIPPING INCLUDED! Payment will be accepted via Paypal (preferred) or money order, certified check. Questions please PM me. So here goes the list I will be categorizing it by type: CPU’s: P3-600 100mhz bus s370 $10 P3-700 100mhz bus s370 $15 P2-350 $8 P2-350 $8 P2-350 $8 P2-266 $6 P2-266 $6 P2-266 $6 P1-75 $3 Celeron 433 $9 AMD 486DX2-66 $3 AMD K62-200 $5 AMD K62-300 $6 HARD DRIVES: Western Digital 30gb IDE 5400rpm- Don’t know if it works will test soon $18 Seagate 40gb IDE 7200rpm- Don’t know if it works will test soon $22 Seagate 13gb IDE 5400rpm $12 HEATSINKS: Globalwin FOP32?- maybe, no fan or clip, good project heatsink all alum. $3 AVC Socket A, had it on an Athlon 2200, temps around 109F idle, all alum. $7 Speeze solid copper Socket A, looks to be like a 1U heatsink, $8 CDROMS: AOPEN 48x CDROM $8 STICKERS: Newegg.com logo sticker Quantity 3 $2 each MOTHERBOARDS: Biostar M5ALA v1.1 with AMD K6-2 350 working $13 Epox ZX370A s370 board, unknown status, not going to test, $8 POWER SUPPLY: Win 200w AT power supply, great for a modding project $12 RAM: HP D8266A 256mg pc133 registered ECC SDRAM CL3, good quality server mem. $40 Micron 64mg pc100 SDRAM $9 Kingmax 32mg pc100 SDRAM $6 PQI 128mg pc133 SDRAM (new) $30 ZIP DRIVES: Iomega Zip 100 IDE internal beige color will dye black if wanted for $3 extra $10 Iomega Zip 250 Parallel Blue color, will dye black for $10 extra, $15 Iomega Zip 100 disks used, $4 each Iomega Zip 250 disks used, $5 each (I think I have some, will check if interested) MODEMS: US Robotics 56k fax external modem painted black with null modem cable 10ft. $20 (I will test it, hasn’t been used in a couple years) LAPTOP PARTS: Toshiba P3 Heatsink fan combo, would make a great GPU cooler for the modder $10 Compaq X1000 used Battery fits a lot of HP and Compaq notebooks, charges full only holds laptop up 2 hours, would be a good backup battery $16 Toshiba LCD inverter board E1405665 $25 (like 85.00 from a laptop part dist.) Toshiba LCD inverter board E1038114 $25 (like 85.00 from a laptop part dist.) FANS: Sunon 80mm 3pin Quantity 4 KD1208PTS2 2.3w, move a lot of air $2.50 each Sunon 80mm 4pin Quantity 2 KD1208PTS3 1.4w, little bit less air $2 each Magic 80mm 3pin MGT8012MS 0.15A $2 Globe 80mm 4pin B011388 0.17A $2 ADDA 120mm 4 pin AD1212HB-F51 0.50A, over 120cfm, made of metal blades and all, a serious fan $18 LED’s I have bright blue, UV purple, and bright white, I can solder in a resistor so that you can add them to a 12v source. I have about 20 of each color. LED’s will be 0.75 a piece without resistor, 1.00 a piece with resistor, LED metal mounts 0.75 LED black plastic mounts 0.50 CASE Inwin Full Tower Biege and Dynomatted to keep the noise down, no power supply $50 MISC: Dexxa ps/2 optical mouse silver, paint black for $5 (extra), needs a little paint to be perfect $5 Capacitors, I have alot of Rubicon's and Panasonic FM's, and some others some used some new, just let me know what you need, all will be $1 a piece, saves you from having to order a ton from digikey to avoid to the handling charges.

Ok, so I think I have a power supply problem, my psu only provides 11.7x to 11.8x on the 12v rail, and all the other rails are a little low too. Do you think this would cause stability problems? Do you think I am drawing too much power? Here are my components: p4 2.4c@3.36 Thermaltake bigwater kit 1gb ocz pc4800 PNY g800gt @ 400, 1100 2 wd 80gb in raid 0 1 seagate 250gb 1 liteon cdrw 1 liteon dvdrw 1 120mm fan 2 cathodes floppy drive All of this running off of a Thermaltake 480watt power supply. Does anybody now if I can turn the voltage rail up in this power supply if I'm drawing a little to much power? Please advise.

I have what may be an obvious question. When you play games, any games, at a higher or lower resoltion than your destop resultion you get screen shrink. The different resolution has a different refresh rate, and isn't formatted to fill your screen. Now is there anyway to make a game fill the screen regardless of resolution, I realize lcd's do this inherently. But I have a nice crt that I don't plan on getting rid of anytime soon. Thanks

I currently have an Albatron PX865PE PRO II, it is a great 865pe based board with alot of features some of which I use some I don't. I left on vacation, came back and the computer was off, turned it back on to get many random memory errors. RMA'd the OCZ PC4400 memory I had, got it back samething (mind you this setup has had no changes in about 6 months). So I got to looking closely at the motherboard itself, and saw that several of the capacitors directly around the memory slots, are leaking, some more than others. I'm assuming this explains everything, but, I'm having a hell of a time finding a motherboard with the features I need included. I would like to stay with the 865 or 875 chipset and it has to be s478 for my 2.4c. The board needs to be overclockable, have a PATA raid controller, have SATA available, and also onboard LAN. Here is the rest of the system I have now: Albatron PX865PE PRO II P4 2.4c @3.3 Thermaltake Bigwater 512mgOCZ PC4400 running at 4400 CL 2.5 in Dual Channel 2 80gb WD PATA hard drives in RAID 0 1 120gb WD 1 250gb SATA Seagate for backup ATI Radeon 9800pro Turtle Beach Santa Cruz Lite-on DVD burner Lite-on CDRW

Ok, so what I need to do, is setup a windows xp machine to be a remote desktop host. While this is normally an easy task, this time I want this host to be a "dial in" connection not IP. So basically, I would like to control this computer by dialing the number to the line the modem is connected to on the host computer. If I need to clearify let me know, I know you can do this with other software, pcanywhere, etc., but I need to use remote desktop it possible. thanks ahead of time

Doesn't the FBI have to get a court order to watch your ISP traffic, and the only method is to use Carnavore.

yes i will hook it to my other machine, I didn't do that becuase this is my primary computer, but I will to make sure its not the monitor

Ok guys see if you can figure this one out. I have a problem with my Viewsonic P95f+B while in windows the monitor will suddenly turn black then come back, sort of like it is switching refresh rates or resolutions. I have no idea while it does this and it is very annoying. I will list my components if it helps. By the way I had this problem before I upgraded to a geforce4 vid. card. Soyo P4S- (sis agp driver is installed) Abit OTES (det 41.09) OCZ pc2700 512mg WD 80gb hd santa cruz that should be all that matters, please if you have any idea, I would most appreciate it, thanx ahead of time

yes i have it installed

I used Customizer XP to remove it from my computer. I guess that is good enough for now, but it sux to have devices present that you don't even have, I hate little things like that

I noticed a few days after installing XP with SP1, I know have an extra drive letter, it refers to a CDROM device named, Image Simulation SCSI CdRom Device. I don't have such a device, I only have a Pioneer 16x DVD and a Yahama 16x burner. This hardware is mounted on a Soyo P4S mobo. IF I remove the device, it reappears on the next boot up. Please help if you can tell me how to rid my system of this device!

I have a p4 1.9 s478 and shuttle AV40 right now, and I want a new motherboard with RAID and LAN onboard. I have been looking at Soyo's new sis 645dx based board and then I read an article about Via's new p4x333 chipset that is fast as hell. I want performance and have OCZ PC2700 RAM so the DDR 333 is the sort of board I'm looking for, please give me your suggestions. Anybody have a soyo board?

I have a visiontek geforce 3, I have tried using the 23.11's that I used with my previous geforce2 ultra, and I get infinite loop errors in 3dmark. So I installed the 28.32's and they work fine, but the performance is lackluster. So which det's do you think I should use? My system spec's are as follows: Shuttle AV40 P4 1.9 512mg OCZ DDR Visiontek Geforce 3 Turtle Beach Santa Cruz Promise ATA 100 controller IBM 75gxp 30gig, IBM 60gxp 60gig linksys NIC Pioneer 16x DVD Yamaha 16x burner 4.38 4-in-1's Windows XP Pro

win2k, seems I always end up going back to it, becuase it is more stable when my system is overclocked. Yes it does feel faster too. I guess becuase it doesn't have all the transitions WinXP does, and I realize they can be turned off. Although if I was going to do that I would just rather have Win2k. haha