hulkaros

We have 5 clients running Win2k pro with static IP, Gateway (Server's IP), DNS (Server's IP). Also, our server runs Win2k server and it has active directory, domain and nat enabled. The problem is that when we try to access the web we can do that only from server! Is there a special way to configure the clients to have web access from server? Oh, server has the ISDN modem too! Here are our server's info: domain.company.com ip 192.168.0.1 mask 255.255.255.0 dns 192.168.0.1 Here are our clients' info: member of the above domain ip 192.168.0.x mask 255.255.255.0 gateway 192.168.0.1 dns 192.168.0.1 Also, I would like to note that pre-Active Directory and NAT time, we had plain workgroup access and ICS enabled. After the changes we have web access ONLY from server while everything else works like charm ;( ANY help would be GREATLY appreciated! Thank you in advance...

After some digging around with the Win2K server and based on this forum's helpful users I managed to fix the problem! N.A.T. settings and not I.C.S. settings were OK from the start! The trouble was at the DNS settings and to be more specific, at the Forward Zone where we had a root server (.). Anyway, I deleted it (. aka root) and everything worked like magic. Thanks everyone for your help and your precious free time Thank you!

Indeed I can ping at any other external IPs through clients but when I type a web address at IE5.5 nothing is found ;( When I typed http://64.124.237.148 the browser worked for a second or two, found that the IP belongs to CNET and then... error! Is there a way to fix this? I have NAT configured to Share the Internet Connection via a Dial-Up interface (ISDN) and as I wrote previously only the server has web access while the clients don't! Thank you in advance...

We have one workgroup of WinMe, Win2K and WinXP through wireless usb adapters... Here is the problem: - XP can see everything on the workgroup (files, printers, etc.) - Win2k and WinMe can see everything on the workgroup except XP's shares that is ;( The exact errors I get are: FROM WinME: IPC$ (while logon at XP as Administrator) FROM Win2K: Logon Failure... (while logon at XP as Administrator) This issue I saw it for the first time with Win2K and the sollution to that was that I had to logon from other computers as Administrator but clearly this is not the case with XP... Thank you in advance!

As I wrote previously (maybe not that clear) all of our clients have dns of 192.168.0.1 and just that. About the "can you get to external nameservers through it" that you replied, what do you mean? The clients can share files, printers, etc. with each other AND the server too! But the server does not share the internet connection to the clients... As for other servers we don't have in our company and we don't need to access other servers or clients outside our workgroup --other than the ISP's server that is Thank you in advance...

We have a small workgroup of 5 PCs (Pentium III) loaded with Win2000 Pro and 1 PC (Pentium IV) with Win2000 Server. Under Win2k Pro all PCs see each other but they do not see the Win2k Server and it cannot see the Win2k Pro PCs. I've set all the PCs with the same Workgroup parameters but everything works except the Win2k server! I've changed the networking card on the Win2k server but the problem insists... Any ideas that may solve this problem will be appreciated!!! Thank you in advance, HULKAROS