macawgumbo 0 Posted January 2, 2004 I have been around the web and cannot find some simple easy to follow directions about how to get the drivers installed for my nforce2 chipset under Fedora Core 1. I have searched this forum and found something about minion.de but am still confused because it says something about kernel 2.6 and I didnt want to undergo a kernel upgrade (still somewhat new at this). I read something about forcedeth but it still is in alpha version and there are no gurantees. I really need to get my ethernet to work so i can start getting everything set up with more useful programs than the canned set and access the internet of course (oh and some networking stuff to work on). I really need help. Last night I tried installing nvidia stuff off there website, but with no luck. Anything please! My kernel is the standard 2.4 that came with Fedora Core 1 Biostar M7NCG PRO (no agp card) integrated graphics Share this post Link to post
danleff 0 Posted January 3, 2004 Boy, all these issues with the nforce chipsets makes me want to get one of these boards to try it out. I wonder...if you could just buy a pci nic card and see if it works? They are pretty cheap @ about $10 and may save some headaches. The driver issue seems to be universal with the nic built-in ehernet on the board. Share this post Link to post
jjcohen 0 Posted January 3, 2004 The drivers at minion.de are for the nvidia video card, not for the nforce chipset. You shouldn't need any drivers for your mobo, except if you need sata, in which case you may be out of luck. Share this post Link to post
danleff 0 Posted January 3, 2004 Also, take a look at Admiral´s thread; http://www.linuxcompatible.org/forums/viewtopic.php?t=923&highlight=nforce Share this post Link to post
macawgumbo 0 Posted January 3, 2004 Also, i have everything set up but i am not sure if the video is working full throttle because some of those simple 3d screensavers seen unussually slow (despite the performance of the onboard geforce4 mx440 being bs). I can render directx under windows quicker than that and thought the performance was suppose to be faster in linux than windows. Oh well, at least it's working. But it is a generic geforce4 mx driver. Any thoughts? Ethernet help is still greatly appreciated. Share this post Link to post
danleff 0 Posted January 3, 2004 Understood. My thought was to use it to get going, then work on the problem with the nforce issue. I just saw a Biostar M7NCD at Computergeeks for $54 and may give it a go. Sorry that I can´t be of more help here. Share this post Link to post
Dapper Dan 0 Posted January 3, 2004 I bought 2 Dells about a year and a half ago, and the onboard nic worked on both of them flawlessly. About 6 weeks ago, a friend of mine bought a new Dell and the onboard nic wouldn't work at all. We had to put a pci in. Pci nics are so cheap now, and almost all of them work with Linux. They can save a lot of head aches! Share this post Link to post
macawgumbo 0 Posted January 3, 2004 Can I use the redhat 9 rpm for fedora from nvidia's website and install it on Fedora? What about installing redhat 9 with the driver and then upgrading (if possible) to fedora? Would that work? Share this post Link to post
Dapper Dan 0 Posted January 3, 2004 macawgumbo, please disregard what I had in this space as I mistakenly thought you were wanting to install the drivers for nvidia video card. It was late, and I'd had a drink. Sorry. :x Share this post Link to post
Admiral LSD 0 Posted January 3, 2004 Quote: Can I use the redhat 9 rpm for fedora from nvidia's website and install it on Fedora? What about installing redhat 9 with the driver and then upgrading (if possible) to fedora? Would that work? I wouldn't use the RPMs at all, they're nothing but trouble. Download the source tarballs, making sure you have both your kernel source (for the exact kernel your running, if it's not on your distro CD have a hunt around their FTP archive) and the development packages installed before following the directions in the nVidia README file on how to compile nad install them. nForce chipsets are fairly easy to get up and running under Linux it's just a lot of people wind themselves up into a whole lot of trouble taking what they percieve to be the "easy way out." Share this post Link to post
Dapper Dan 0 Posted January 3, 2004 macawgubo, please see my edited post two back.. Share this post Link to post
Admiral LSD 0 Posted January 3, 2004 His board has the integrated IGP graphics so he'll need to install the nVidia graphics drivers eventually if he wants to get that working so you should have left it as it was Share this post Link to post
macawgumbo 0 Posted January 3, 2004 So do you recommend upgrading my kernel to 2.6.whatever, or leave @ 2.4? What about using ALSA or NVAUDIO? What about using NVNET or FORCEDETH? What about IGP graphics drivers, will I need those, or is it fine if I leave them with the generic? {minion.de??} Share this post Link to post
Admiral LSD 0 Posted January 3, 2004 Kernel 2.6 is probably the best for nForce chipsets but 2.4 can be made to work just as well, especially if you're using a later version such as 2.4.22 and up. Pick whichever one you're most comfortable with: 2.6 if you're interested in compiling your own kernel or 2.4 if you don't want to worry yourself with that just yet. ALSA is probably the best bet for sound on Linux regardless of whether you're using 2.4 or 2.6 (in the latter case the decision is made for you: OSS is deprected pending its removal entirely). FreshRPMs has Fedora compatible RPMs for virtually everything you need to set ALSA up (alsa-driver, alsa-lib, alsa-utils, alsamixer and alsaplayer) but you're probably better off compiling at least the drivers yourself to overcome any kernel version matching BS in the RPMs. Compiling the drivers is as simple as downloading their source from the ALSA Project site and running the following command in a terminal as root (after first extracting them into a temporary directory, usually /usr/src, and switching to that directory): Code: ./configure --with-cards=intel8x0 --with-debug=none --with-oss=yes --with-sequencer=yes make && make install adding the following to /etc/modules.conf: Code: # nForce ALSA portion alias char-major-116 snd alias snd-card-0 snd-intel8x0 # module options should go here # OSS/Free portion alias char-major-14 soundcore alias sound-slot-0 snd-card-0 # card #1 # nForce ALSA portion alias char-major-116 snd alias snd-card-0 snd-intel8x0 # module options should go here # OSS/Free portion alias char-major-14 soundcore alias sound-slot-0 snd-card-0 # card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss options snd-intel8x0 mpu_port=0x330 install snd-card-0 /usr/sbin/alsactl restore >/dev/null 2>&1 || : remove snd-card-0 /usr/sbin/alsactl store >/dev/null 2>&1 || :alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss options snd-intel8x0 mpu_port=0x330 install snd-card-0 /usr/sbin/alsactl restore >/dev/null 2>&1 || : remove snd-card-0 /usr/sbin/alsactl store >/dev/null 2>&1 || : before typing modprobe snd-intel8x0 to activate the drivers. Deciding between nvnet or forcedeth again depends on whether you're comfortable patching and compiling the kernel or not. atm forcedeth is only supplied as a kernel patch so if you're trying to avoid a recompile nvnet is probably your best bet. And finally, the same drivers nVidia supply for their regular graphics cards are also compatible with the IGP so anything that applies to them should apply to your IGP as well. You'll want to grab these if you want decent 3D performance as the stock DRI drivers tend to be fairly disappointing in this area. Share this post Link to post
macawgumbo 0 Posted January 4, 2004 Thanx so much for your help. One more quick question is that is there a link or something that will provide some info on recompiling a kernel and applying patches to it? Any background info is greatly appreciated on kernel compiling also. Share this post Link to post
danleff 0 Posted January 4, 2004 Of course, I hessitate to mention, but there is a kernel 2.6.0 RPM available for Fedora core 1. Works good for me! OK, I bought the Biostar nforce board, I could not resist! Found it at TigerDirect for $51.99. Something to challenge me a bit. Share this post Link to post
Dapper Dan 0 Posted January 4, 2004 Should I say how to install the nvidia drivers now? Share this post Link to post
macawgumbo 0 Posted January 4, 2004 drivers for igp would be greatly appreciated too. cuz 3d stuff sucks right now. for 2.6 kernel if you can get me some info on compiling kernels with the other drivers mentioned earlier in this thread. ex: ALSA, FORCEDETH (KERNEL 2.6), now NVIDIA GEFORCE4 MX IGP Share this post Link to post
Dapper Dan 0 Posted January 4, 2004 I'll try to re-create my post about how to install the nvidia drivers that I thought was inappropriate but then, as it turns out, was. I'm not knowledgeable enough about the others stuff to help though, sorry. Share this post Link to post
danleff 0 Posted January 4, 2004 Dapper Dan; Not a bad idea as I would be a newbie at this LOL. There is an RPM for kernel 2.6.0 for Fedora, I have it running on my system. However, the nforve drivers are not compiled in as modules, so it looks like a kernel compile may be in order. This is not for the faint of heart. There is an excellent article on the subject entitled slackware on fire. I will have to look it up. It will give you an idea on how to do it. It is in the archives on this site, but was moved from the original article location. I will try to look it up for you, so you can see what is involved. Let's se if this works; http://www.madpenguin.org/modules.php?op=modload&name=News&file=article&sid=337 Share this post Link to post
Admiral LSD 0 Posted January 4, 2004 You shouldn't need to recompile, depending on how that RPM was compiled every required for nForce chipsets should already be present save the LAN and graphics drivers. Both are available on nVidia's site but you'll need to patch them before they'll compile right under 2.6. You can get the patch for nvnet here and patches for the graphics drivers here. Share this post Link to post
danleff 0 Posted January 4, 2004 I looked at th /boot/config file and nforcewas not set. Did I mistakingly assume that they are not compiled into the kernel? Share this post Link to post
macawgumbo 0 Posted January 4, 2004 i got nvnet to work and whatever else was in nvidia's driver suite. It seems to work fine, so I think i'll leave it until i learn a little more about upgrading the kernel and recompiling the drivers into it. Share this post Link to post