homi 0 Posted May 18, 2001 Hi guys when i put my 3com 10/100 network card in a pci slot... it comes up thinking i have a virus on the harddrives... and it doesnt pass the "PXE" or something... and then gives me option to carry on booting or reboot.. if i try carry on.. it dont do anything.. i have an Asus A7V 133, AMD tbird 950mhz, USB Adsl.. that shouldnt effect the card? if anyone has the same mobo.. any chance of helping setup.. maybe abios setting.? Thanks. Share this post Link to post
Brian Frank 0 Posted May 20, 2001 I dont see where you're coming up with the NIC being a problem. Have you tried putting it in a different PCI slot? It sounds more like something with the Promise ATA100 controller than something else. Have you considered that you could have a virus? Especially if you dont have one or dont keep it updated. Share this post Link to post
clutch 1 Posted May 20, 2001 The PXE reference is for booting off of the NIC (at least from what I remember). You may want to go into the BIOS of the NIC (you should see a prompt for it just after POST and before the OS starts-on Intel NICs it's "Ctrl+S") and see if it's set to boot off of the NIC. The mainboard itself could be set to boot off of the NIC first, then floppy/CD/HD. You can check the boot order in the main BIOS as well. Share this post Link to post