Mr.Shadow2k 0 Posted October 10, 1999 I have Windows2000 RC2 2128, but it can't find any (COM) ports, ok it will find them but i can't use them... In Win98 they work just fine!!! I have tried to change the COM settings in my BIOS but nothing helps!! I have the ASUS P2L97 motherboard, Logitech 3-Button Serial Mouse (have tried with P/S2 mouse but it won't work eather...), External ISDN64Kbps modem (connects to the serial port to = don't work) IS THERE ANYONE THAT CAN HELP ME!!! PLEASE!!! IS THERE ANY NEW DRIVERS??? I HAVE THE NEWEST BIOS VERSION, 1008. HELP ME!!! Share this post Link to post
Seldzar 0 Posted October 10, 1999 I have had the same kinda problems, my wacom penparter worked fine in 2072 and 2114 but as soon as installed rc2 it now will not detect it =( The resources in my bios are the same as assigned to my com ports but it just don't get recognized when i attempt to install the drivers. Share this post Link to post
SHS 0 Posted October 10, 1999 Did you try PnP OS ?. All so this is well known bug to. Share this post Link to post
Seldzar 0 Posted October 10, 1999 I've tried both, it doesn't work under plug & play OS or non plug and play OS. One thing i noticed is that win2k does notice my tablet on the com port in device manager but the driver isntallation doesn't detect it. [This message has been edited by Seldzar (edited October 10, 1999).] Share this post Link to post
BillB 0 Posted October 19, 1999 I had similar problems, my board ASUS P2B-F needed a bios revision, now 1010, which cured com port problem. Word tonite from Windrivers.com, that 1011 is now posted on ASUS' German website. Check out a Bios revision, I think this will cure your problem. Share this post Link to post
Seldzar 0 Posted October 19, 1999 Well considering I have an ABIT BP6 I'll hold off on the Asus bios upgrade =) But I will look into an ABIT bios upgrade. Share this post Link to post