Jump to content
Compatible Support Forums
Sign in to follow this  
Dazultra2000

Weird DVD skipping problem

Recommended Posts

It's been happening for a while now, but whenever I watch a DVD, it'll play fine for about 5 minutes, and will then skip ahead 2-3 seconds. This then repeats throughout the entire film.

While it doesn't seem like much, it can often mean missing an important part of dialog, and it can ruin the whole film.

 

This hasn't always happened though.

It has happened in powerDVD, winDVD and Media Player - and I'm not sure how to fix it.

I have tried my DVD drive in PIO and DMA modes, and have enabled/disabled Hardware MC (geforce motion compensation).

 

Is it just my DVD drive being a problem, or can it be fixed?

My DVD drive is a 4x DVD combo drive (built in CDRW).

Share this post


Link to post

Might be the drive itself. I had one of those Ricoh comobos once, and after I flashed it, i got 9 coasters out of 10 possible, lol. It played DVDs still, but it had to go...

 

Also, what color depth is your desktop at?

Share this post


Link to post

Desktop is set at 32bit - and I will think ahead and try 16bit smile

 

drive burns CDs fine, in fact I've done 4 today with no problems. Don't know why it's doing the whole skippy thing tho

weird

Share this post


Link to post

Some guesses: -stop Screen Saver; -unmark "Enable CD Recording on this drive" in Computer, CD-RW, Properties; -remove Fraunhofer IIS Mpeg Codec in Device MAnager, Sound Video and Game Controllers, Audio Codecs.

 

Lowering resolution is right because 32 bits and even 16 bits steal the bandwith from the video overlay which operates solely in the remaining video memory. 8 bits has been recommended for DVD playback.

Share this post


Link to post

-unmark "Enable CD Recording on this drive" in Computer

 

 

hmm..I didn't think of that one. Seeing as it's a combo drive you may be onto something there. I'll give it a whirl.

 

(btw setting to 16bit didn't work)

Share this post


Link to post

Seeing as you can burn fine with the drive this may not be your issue, but I had almost exactly the same problem until I replaced the cable I was using to connect the drive. IDE cables can go bad, and are almost always overlooked when they do. Can't hurt to try. Mine is smooth as butter now that I've replaced the cable. smile

Share this post


Link to post

Eurgh.

That program did not like my drive at all

It wouldn't read ANY dvd past the 0.00GB mark, and gave a read error code (056F03)

Seek time test worked, and ranged from 127ms to 211ms

 

Is this an indication that the drive is broken?

Share this post


Link to post

Most DVD Video's use a copyprotection called CSS which locks the disc and makes it impossible to read data from it.

If such a disc is used for testing the drive with DVD Speed, the test will abort with error code 056F03.

A solution for this is to unlock the disc by playing the video with a software DVD Video player which will unlock the disc.

The disc remains unlocked until it's removed from the drive or until the system is restarted.

You can immediately shut down the DVD Video player after you started to play the disc.

Share this post


Link to post

Nero DVD Speed

 

09 April 2002 - 20:27:39

 

Drive information

Vendor RICOH

Product DVD/CDRW MP9060

Firmware Version 1.90

 

Disc information

Type DVD-Video

Length 5.76 GB

 

Test results

 

Transfer rate

Average 3.31 X

Start 1.83 X

End 3.23 X

Reading type CAV

 

Seek Times

Random Seek 132 ms

1/3 Seek 142 ms

Full Seek 209 ms

 

CPU usage

1X 1 %

Max Speed 1 %

 

Interface

Burst Rate 0.61 MB/s

 

Spin Up/Down Time

Spin Up Time 3.20 sec

Spin Down Time 1.70 sec

 

Disc Eject Time 2.55 sec

Disc Load Time 10.60 sec

Disc Recognition Time 0.01 sec

 

I assume that's about right for a 4x DVD drive.

 

Any other suggestions?

Share this post


Link to post

You've probably already done it, but it doesn't hurt to ask. Have you looked at how your IRQ's are assigned given that XP and 2000 under ACPI like to string a bunch of PCI devices to the same interrupt. Most of the time, there isn't a problem. Sometimes giving a device its own interrupt resolves it.

Share this post


Link to post

You'd be right when asking if I'd already done it :P

 

All of the major devices on my computer have their own IRQ, these being sound, gfx, IDE etc

 

Anything else?

Share this post


Link to post

It is. You have first class equipment. It is connected by the book, so you are really down to the technology itself. There can be all kinds of reasons for this flipping, but you've ruled out so many of the common ones. There are software issues in relation to sound and video at this point.

 

Windows is not a real time environment.

 

Problem 1 of frame dropping) On DVD's the sound can be carried down one channel and the video on another. Timing to have them intercept properly is key. If the sound is ready (or "too quick") and the video isn't, frames are dropped from the video to connect to the next "proper" intersection.

 

Problem 2) There is a serious demand on memory and video memory. There is a kind of look ahead process to create the sequential frames to be shown. They create an "overlay". A lot of software now use DirectX functions, one of which is flip(). In other words, frames are cued and flipped to create the motion. If for whatever reason the cue of overlays cannot be processed and flushed from the buffered memory, frames are dropped to permit the overlaying framing process to continue at the expense of frames ready to be viewed. Either timing of the flipping or the memory buffer limitation of the software or hardware can cause this. Result, frames are dropped.

 

ATI and Nvidia apparently handle these things differently. You could try a software package for DVD movies that is theoretically VGA independent. Ravisent is one. There are probably others.

 

In reading your hardware specs with the latest Bios, drivers, etc., with no other conflicts and given the performance of your machine, unless some widget has been overlooked, its the last road I know to travel.

Share this post


Link to post

a 4X DVD is kinda slow, i had the same problems on with a SCSI 4X DVD. Seemed like it didn't like newer DVDs, would always skip. Got a 16X DVD and haven't seen a skip yet.

Share this post


Link to post

well the "access" light is never always on - it blinks in regular intervals when playing discs, so I assume it's not being taxed to it's full limits.

This in my view proves that it's fast enough.

 

Why wouldn't 4x be fast enough anyway, all DVD-Videos are 1x anyway. All standalone players have 1x drives (unless they are expensive and have decent scan facilities).

Share this post


Link to post

Here's a news flash.

I was playing an MP3 CD just now, and the same thing happened. The track skipped ahead about 1-2 seconds.

 

This seems to be related.

It never happens when playing off the hard disk, but playing from CD does it.

 

 

any suggestions now?

Share this post


Link to post

UPDATE:

I tried it on my other CD drive and it does the same thing.

 

I don't remember this happening on my old KT7 system.

 

Any ideas?

Share this post


Link to post

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×