videobruce 0 Posted April 2, 2004 I know that is the way it is, but why? When you move a card to another slot, Windows has a memory problem and forgets that the card was even there and has to reinstall the driver all over again. Worse yet, I have a 3Com NIC that when the O/S was loaded with the card in place the card was reconiged and the driver was installed with no problem. When I moved the card (to make way for a dual slot card combo) Windows couldn't find the driver! Even when I put the CD in it still couldn't find the driver! I did have a driver from 3com that worked after a couple of times tring different versions that aren't labeled the best. I'm running 2k /sp4 Input...........? Share this post Link to post
jmmijo 1 Posted April 3, 2004 Just one acronym for you on this: PnP (Plug-N-Play) The technical reasons are that the card, PCI or ISA has now been assigned a new IRQ by the system bios and thus looks like a new device to the OS I would d/l the latest drivers for your model 3com card and copy then to floppy disk. The old floppy drive is still valuable for this reason alone... Share this post Link to post
