deerslayer65 0 Posted May 16, 2004 Recently, after installing some security hotfixes to my windows 2000 build I had a stop error when rebooting. I had applied about 30 of these fixes through the windows update so I cant pinpoint which update is causing the trouble. Everything was working fine with SP2 installed. Basically, I am using the mscant3.55 driver shell from umax with the Mscant2.43 vistascan driver overlaid. What happens is when win2k attempts to load the umaxdrv.sys file of the vistascan 2.43 driver, it gives me the STOP message. I am using the adaptec 2940 scsi card with my Pentium III dual I ghz system 512mb ram. Any ideas. This model is not supported directly in windows 2000 and I have only been able to get the Vistascan 2.43 driver to work in NT and windows2000. Thanks Share this post Link to post
deerslayer65 0 Posted May 16, 2004 Other pertinent information STOP 0x0000001e 0xc000005, 0xed7f9be6, 0x0000000, 0x00001028 Address EB7F9BE6 base EB7F8000 Date Stamp 30a87b15 Umaxdrv.sys Share this post Link to post
BretMatthews 0 Posted July 16, 2004 Hi, I've just had a similar problem. It appears thta SP4 replaces any 3rd part SCSI drivers. What I did to resolve this was to boot from the Win 2k Install CD and go into the recovery console. There I listed the services (listsrv) and then removed the umaxdrv.sys and umax????.sys services I then rebooted and the machine came up. I will now have to find new drivers for my scanner. However, if you asked the SP upgrade to save files then you may still have the driver on your machine. Hope this helps. Cheers, Bret Share this post Link to post
