David Overton 0 Posted February 4, 2000 I have managed to get the WInTV USB TV device working under windows 2000 using the win 98 devices. Here is how to do it (pretty much a memory dump): 1) download the following from www.hauppauge.com : usbdr141.exe hcwsubid.exe win2v2k22.exe 2) create a temp dir, such as c:\temp\TV 3) rename the usbdr141.exe file to *.zip 4) extract usbdr141.zip file to c:\temp\TV (it will ask about replacing a file, just say yes) 5) run the hcwclear.exe program and select the bottom most choice - kills everything 6) reboot if required 7) go to device Manager (my computer / manage or control panel / system / hardware devices ) and select the USB TV card and select properties / Driver / Update Driver / Display a list / Have a disk / c:\temp\TV - select the appropriate driver for your TV signal e.g. Pal I for UK. 8) go to \winnt\system32\drivers and check that the file nuvision.sys exists. If not, copy the one from c:\temp\tv 9) copy all the dll's and *.ax files from c:\temp\tv to \winnt\system32 (This is the sledge hammer approach) 10) register the .ax files with the following commands: regsvr32 /s C:\drivers\tv\usb.new\NTtuner.ax regsvr32 /s C:\drivers\tv\usb.new\NTCODEC.AX regsvr32 /s C:\drivers\tv\usb.new\hcwcapt.ax 11) run the hcwsubid.exe program 12) run the win2v2k22.exe to install the tv viewer 13 - try the winTV2000 program. that is it! Dave P.S. Sometimes the system does a Blue Screen of Death - this seems to be caused by the screen saver kicking in while the system is playing TV. Share this post Link to post
