seelo 0 Posted September 22, 2004 at the login screen to city of heros, i got a message that said i need to update video driver. so i went to http://www.ati.com and went to download and install the new software for my radeon 9800 pro. when i installed, i got the error that it needed to be in standard vga mode. then i went to the sys info under device manager and i had under display adapters radeon 9800 pro and also radeon 9800 pro secondary. both had a red X in the little box. so i deleted them and rebooted. this time i let windows install it all by itself. well it installed it but it said it couldn't successfully install it and said "could not find a specific file." this is now where i am at the present, under device manger now i have radeon 9800 pro with the yellow explanation mark in the box. the video is working fine, however, when i reboot or shutdown, the windows "found new hardware", "found new device keeps popping up" so i have to re-install all over again any suggestion, thanks Share this post Link to post
DS3Circuit 0 Posted September 22, 2004 At this point I would suggest a complete removal of the catalyst drivers and a reinstallation A) Run the uninstaller found in either the ATI driver folder found in the root of the C drive or in the control panel applet. If you are unable to do completely remove it from there, Driver Cleaner should aide you http://www.driverheaven.net/cleaner/ C) Reinstall the ATI or Omega drivers, whatever your preference is HTH Share this post Link to post
