kobedf 0 Posted December 2, 2004 i have sid installed and currently i am booting from the FDD what i want to do si put only lilo on a fdd ( and not the kernel.....) and with it to choose between linux and windows.......... i don't want the kernel on the FDD because it takes time to load. thank you Share this post Link to post
egorgry 0 Posted December 2, 2004 Are you sure the kernel is on the floppy? The vanilla Debian kernel is too big to fit on a floppy. Share this post Link to post
kobedf 0 Posted December 2, 2004 well i have the 2.4 kernel and on the floppy i have : linux.bin 1.1MB ldlinux.sys 6.8k and a readme that says "Linux will be started automatically using the kernel on this floppy disk. The root filesystem will be mounted from /dev/hdc5 . " it also says "if you wish to use a kernel on the hard disk, remove the floppy and press RESET " but i cannot seem to get this right I know new kernels are bigger that's why i want only lilo on the FDD and make lilo boot using the kernel on my hard drive how do i do that? Share this post Link to post
egorgry 0 Posted December 2, 2004 Sounds like your booting the rescue disc. Can you boot Debian wihtout the floppy? what happens when you try to boot from the hard drive. You'll have to excuse me I'm working on two hours sleep. So I may just be deliriouse. My advice to teh kids out there find yourself a nice job supporitn a development enviornment because when production is down you are UP! Share this post Link to post
kobedf 0 Posted December 5, 2004 if i don't use the FDD my system boots into Windows because that's the way i want it to behave . i have not installed a boot-loader yet.that's why i want to put lilo on a floppy and with it to choose from windows or linux . Without the floppy i want my sistem to boot into Win. Share this post Link to post
egorgry 0 Posted December 5, 2004 I've never done what this without having lilo installed an configured in the mbr. Create Lilo Boot Disk: Your distribution may already come with a utility to create a lilo boot disk. From a console type: mkboot or mkbootdisk. My system had mkboot however it ran with errors so I was forced to figure out how to create a boot disk manually, intructions below: 1) Open a console, insert a floppy in the drive and type the following: #mke2fs /dev/fd0 #mount -t ext2 /dev/fd0 /mnt/floppy #cd /mnt/floppy #mkdir etc && mkdir boot #cp /boot/boot.b /mnt/floppy/boot #cp /boot/initrd /mnt/floppy/boot #cp /boot/vmlinuz-2.4.20 /mnt/floppy/boot The first line above will format the floppy. Ignore /boot/initrd if you don't have an /boot/initrd file. Change the vmlinuz kernel number to match yours, do uname -r to find out the number of your kernel. 2) Create a text file called lilo.conf in /mnt/floppy/etc, add the following text, save and close: boot=/dev/fd0 install=/boot/boot.b MAP=/mnt/floppy/boot/map read-only image=/mnt/floppy/boot/vmlinuz-2.4.20 label=linux root=/dev/hda6 Change the information above match your system. 3) Install Lilo: #cd /floppy #lilo -C /floppy/etc/lilo.conf The -C parameter allows you to specify a lilo.conf file other than the customary one in /etc. Share this post Link to post
kobedf 0 Posted December 5, 2004 doesn't this sequence boot with the kernel on the FDD also? Share this post Link to post