Untitled thread

[shaylynree 0]

error: Stop: 0x00000050 (0xF6B05000,0x00000001,0xBF82ccE0,0x00000000) Someone "PLEASE HELP"..started to tighten a loose lightbulb in my lamp and "BOOM", power and pc went off then back on..problem is when my pc came back on it went to a blue error page that said,

stop: 0x00000050 (0xF6B05000,0x00000001,0xBF82ccE0,0x00000000)

I've tried starting in safemode and booting from the xp boot cd and does same thing. i've also went into the bios and disabled L1 and L2 cache and the write to bios setting..when i do that i can startup completely but it's soooo slow it takes hours.

Any ideas or help of any kind would be greatly appreciated.

:)Thanks

[peterh 1]

Please print out the rest of the Stop message. More info at:

 

http://aumha.org/win5/kbestop.htm

 

[Sampson 0]

Reading stop messages can be a fruitless endeavor. Generally, after electrical surges, particularly on older machines, the hard disk takes the hit. The next in line can be the ethernet card and serial port, then the ram, and finally some component on the motherboard.

[shaylynree 0]

here is the error code i get when i enable writeback for L1 cache and try to start....

 

TRAP 00000006 EXCEPTION

 

tr=0028 cr0=00000011 cr2=00000000 cr3=00000000

gdt limit=03ff base=00017000 ldt limit=07ff base00017400

cs:eip=008:004D8000 ss:esp+0010:000600E90 err code=0000

flags=00010087 cy no Zr IntDis Down TrapDis

eax=8AC0BBB0 ebx=00000000 ecx=00039000 edx=0003B000

ds=0010 es=0010 edi=0046A18C esi=00000006 ebp=00060EB4

Cr0=00000011 fs=0030 gs=0000

 

any thoughts on this will be greatly appreciated. thank you.