Hitokiri808 0 Posted January 28, 2005 Hi all I just bought a Homefree Network, but i did not know it only compatible with Windows 95 and 98 until I opened the box and I'm using window xp. Is there anyway to use this Homefree Network?...thanks for helping.... Share this post Link to post
peterh 1 Posted January 30, 2005 Whats in this package? Modem? Software? Who's the publisher? Share this post Link to post
Hitokiri808 0 Posted January 30, 2005 The box contents with 1 Homefree PCI Card, start guide, CD-ROM with networking software. Published by Diamond Multimedia.. Share this post Link to post
wkgmxxx 0 Posted February 25, 2005 The driver for Diamond HomeFree wireless lan ISA/PCI/PCMCIA adapters and cards for Windows NT4/2K/XP is called 'HF000X' and can be found on www.driverguide.com. A free registration may be required. WM Share this post Link to post
JoshHewitt 0 Posted August 12, 2005 Hi, I am facing more or less the same problem. Although the driver (HF000X) works fine, I don't seem to be able to build up a network connection with the other computers. Is there any other software or bright minds that could help me? Josh Share this post Link to post
wkgmxxx 0 Posted August 15, 2005 Check your configuration: Physical (on every machine): * install identical protocol driver, for example TCP/IP * choose only minimal different ip's (192.168.000.00x, number x must differ on every machine) * identical subnetmask (255.255.255.000) * NO! internet firewall for this connection * NO! DNS server for this connection Logical (on every machine): * different computer names * identical workgroup * identical computer description, MUST be 'MYNETWORK' * specify a drive to share, for example C:\ (accept 'easy share' without assistent) Probe the connection by pressing key 'F5' several times while viewing the 'network folder'. Check the task bar icon and box of the wlan connection. If 'packets send'was counted up, but 'packets received' wasn't, your physical settings are incorrect (wrong protocol etc.). If 'packets send' was counted up, and 'packets received' too, your physical settings are correct, but logical settings differ. Find nodes via windows 'SEARCH' using the exact name of the machine you look for. If you still can not find any, your share settings are wrong or the firewall ist activated for this connection. Share this post Link to post
