Might and Magic 6 install problems

[seadoojunky 0]

I recently purchased Might and Magic 6 on ebay brand new in the box. I am trying to install the program on my PC and I am having trouble. My computer has Windows XP and it has a 1.8GHz processor. It wont let me install the program. Every time I try to install I get the following error in a dialog box labeled in the upper left corner

 

(16 bit windows subsystem)

C:\Windows\System32\AutoExec.NT The system file is not suitable for running MS-DOS and MS Windows Applications

 

Thanks

Seadoojunky

[Wilhelmus 1]

Quote:

http://support.microsoft.com/default.aspx?scid=kb;en-us;324767

RESOLUTION
To resolve this issue:
1. Insert the XP CD into the CD drive or DVD drive.
2. Click Start, and then click Run.
3. In the Open box, type cmd, and then click OK.
4. At the command prompt, type the following commands, pressing ENTER after each command:

expand CD-ROM Drive Letter:\i386\config.nt_ c:\windows\system32\config.nt

expand CD-ROM Drive Letter:\i386\autoexec.nt_ c:\windows\system32\autoexec.nt

expand CD-ROM Drive Letter:\i386\command.co_ c:\windows\system32\command.com

exit

5. Start or install the program.
If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to the next step.
6. Note: The Command.com file is not edited or created in this in the following process. Because of this, you may have to expand it from your Windows XP CD-ROM.

Start Notepad.
7. In Notepad, type the following entries:

dos=high, umb
device=%SYSTEMROOT%\system32\himem.sys
files=40

8. On the File menu, click Save As.
9. In the File Name box, type Config.nt, and then click Save. Close the Config.nt file.
10. On the File menu, click New.
11. In the new blank document, type the following entries:

@echo off
lh %SYSTEMROOT%\system32\mscdexnt.exe
lh %SYSTEMROOT%\system32\redir
lh %SYSTEMROOT%\system32\dosx
SET BLASTER=A220 I5 D1 P330 T3

12. On the File menu, click Save As.
13. In the File Name box, type Autoexec.nt, and then click Save. Close the Autoexec.nt file.
14. Start Windows Explorer. Locate the Config.nt file, right-click the Config.nt file, and then click Copy.
15. Right-click the %SYSTEMROOT%\System32 folder, and then click Paste.
16. Locate the Autoexec.nt file, right-click the Autoexec.nt file, and then click Copy.
17. Right-click the %SYSTEMROOT%\System32 folder, and then click Paste.
18. Locate the Command.com file, right-click the expanded Command.com file, and then click Copy.
19. Right-click the %SYSTEMROOT%\System32 folder, and then click Paste. Restart your computer.