flipnjme 0 Posted March 2, 2005 None of my usb ports seem to work. Every device I hook up I get a "device cannot be recognized error". I have a 400 watt power supply. Could it be there isn't enough power. The motherboard is a dfi lanparty nf4 ultra. Any help would be appreciated thank you. Share this post Link to post
Wilhelmus 1 Posted March 2, 2005 Is the usb controller enabled in BIOS? Does the windows have drivers installed for it? Quote: ... 400 watt power supply. Could it be there isn't enough power ... That should be enough. Share this post Link to post
flipnjme 0 Posted March 2, 2005 The drivers are installed and for usb and it is enabled in the bios. Share this post Link to post
Aruffell 0 Posted March 11, 2005 I have the same problem on my DFI LANparty NF4 SLI-DR. If i have a usb device in at startup it freezes at the post screen. If i try fitting any in windows i get "device cannot be recognized error" Any help is greatly appreciated. Andy Share this post Link to post
theefool 0 Posted March 11, 2005 Not sure what devices you are trying to plug in. But, you can go here: http://www.usbman.com/winxpusbguide.htm to find out some troubleshooting tips with usb.... Share this post Link to post
Aruffell 0 Posted March 11, 2005 It's not a windows XP usb problem, but a problem with the DFI lanparty board's usb. An official DFI technician emailed me this answer - Sir I have referred similar incident to engineering of DFI in Taiwan and they are working to determine what resolution is required. No concrete word at this time. Thank you for contacting tech support. Share this post Link to post
Aruffell 0 Posted March 11, 2005 I actually just fixed mine, by changing the boot order, i didn't have removable in there, i had the 3rd boot device disabled lol Share this post Link to post
