Please help me on shadow warrior!

[aaBlueDragon 0]

remmember the game Shadow Warrior? ive downloaded it and played it on xp works great (i fixed some things to make it work)

but when i enter the setup.exe and click on the sound options,

i only have sound and no music, i can change the sound card but

the music card doesnt even apear in the menu, only music

i thought its because i used some wierd version of SW, i downloaded from other places, but still the same, how do i add music to SW? help plz

[Wilhelmus 1]

Similiar thread: http://www.ntcompatible.com/thread17230-1.html

 

Try those.

[aaBlueDragon 0]

this isnt my problem, i allready fixed the sound problems, i play it with sound, but without music, because i dont see music

options in the setup.exe file, the game works good with sound,

but i cant make it work with music because there is no music options in the setup.exe file!

maybe its because of the shadow warrior version im using, maybe

someone can send me his shadow warrior? plzz help me

[ross_aveling 0]

All versions of Shadow Warrior have CD audio tracks for the music... so no original CD, no music.

 

Out of interest, what did you do to get it working under XP?

 

[DosFreak 2]

If your using the original CD then check your CD volume settings in Volume Control. Also open the CD up with Media Player and see if it has a soundtrack on it.

 

Finally you may want to see if your using the digital out cable on the back of your cdrom or if your using CD audio over IDE, properties can be check in device manager for your CD drive.

[Wilhelmus 1]

Originally posted by aaBlueDragon:

Quote:

this isnt my problem, i allready fixed the sound problems, i play it with sound, but without music, because i dont see music

options in the setup.exe file

Ahh.. sorry. My bad.

 

That's... kinda wierd...

 

Quote:

http://www.deathmask.net/buildxp/

Step 8 - Set up the games correctly

 

You will be at the Main Menu of the Setup program.

Sound Setup will be highlighted since it is the first option on the menu.

 

Press enter to go to Sound Setup. The first and most important options you will want to change are found here.

 

Select Choose Sound FX Card. Select Sound Blaster. This will take you to Sound Blaster Configuration.

The correct address is 0x220. This should be the default address so you should not have to change it.

 

Move to Change Sound Card Type using the down arrow key and press enter. Select Sound Blaster 16 or AWE32.

Select Change Interrupt. Select IRQ 7.

 

You should not have to modify the 8-bit or 16-bit DMA unless you've changed them since their default values of 1 and 5, respectively, are correct.

 

Select Use These Settings and Continue. There will now be several consecutive dialogs that you must go through. In the first one you will select the highest number of voices possible. In the second, select the highest number of mixing bits. In the third, select Stereo sound. In the fourth, select the highest mixing rate.

 

You will automatically be taken back to Sound Setup after selecting the mixing rate. Now, select Choose Music Card. Select General Midi then select MIDI port 0x330.

Do not test either the Sound FX or Music within Setup. Neither will work correctly yet.

 

Try downloading demo and see if it have same issue as your SW package.