atagar 0 Posted August 14, 2006 Hi. I've recently installed Xubuntu (Dapper) and run across a rather crippling issue- I can't get on-line. Xubuntu detects my external 56k modem, it connects (making the handshaking sound), then hangs up once the connection is established. The modem works under Fedora Core 5 and Windows 2000. I've been working on this for a couple of days and I'm totally at a loss. Lurking on forums, I found one thread with a similar issue back in 2004. A person mentioned that the solution was to "simply type apt-get gnome-ppp". The problem? I need an Internet connection to get an Internet connection. I can't simply get gnome-ppp and copy it over because it includes about ten dependencies- each of which have dependencies of their own. Even if I could, there's no certainty that it would fix the problem. I tried to connect through a terminal via the pppconfig then pon commands. This created a lasting connection (once) but didn't allow any internet activity (either though a browser or apt-get). Does anyone have any ideas of things to try? Thanks. -Damian System: HP Pavilion 7845 863MHz PIII processor 256MB ram Master HDD: 40 GB 38GB Windows 2000 (NTFS) 2GB FAT32 *Windows was installed with a normal Windows 2000 disk Slave HDD: 10 GB Xubuntu 6.06 Share this post Link to post
Philipp 6 Posted August 15, 2006 Which modem are you using? At least, the default Ubuntu/GNOME distribution is working fine with an older US Robotics 56k modem. Share this post Link to post
Philipp 6 Posted August 16, 2006 Have you already tried Ubuntu with GNOME on that machine? If you prefer a lightweight desktop, there are also Xfce4 packages available for Fedora Core 5. You find these packages in the Fedora Extras repository. Share this post Link to post
Wilhelmus 1 Posted August 16, 2006 Try running: wvdialconf /etc/wvdial.conf as root in terminal. "This will identify the port your modem is on, establish an initialization string for your modem and save the results in the /etc/wvdial.conf directory." Then edit /etc/wvdial.conf to reflect your settings. Share this post Link to post
atagar 0 Posted August 16, 2006 Thanks. With the wvdial command I was able to get a sustained connection. However, like pon it didn't allow a browser or apt-get to function. Below is the output... sorry that it's a bit long. The termination signal near the end was to disconnect after I found it wan't working (it's not an errror). Any ideas where to go from here? atagar@pc1:~$ sudo wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- OK ttyS0<*1>: ATQ0 V1 E1 Z -- OK ttyS0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyS0<*1>: Modem Identifier: ATI -- 56K External Modem Venus V.92 Serial s02.08.16iA06 V2 V92cap Mercury ttyS0<*1>: Speed 4800: AT -- OK ttyS0<*1>: Speed 9600: AT -- OK ttyS0<*1>: Speed 19200: AT -- OK ttyS0<*1>: Speed 38400: AT -- OK ttyS0<*1>: Speed 57600: AT -- OK ttyS0<*1>: Speed 115200: AT -- OK ttyS0<*1>: Max speed is 115200; that should be safe. ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S2 S3 S4 S5 S6 S7 S8 S9 Modem Port Scan<*1>: S10 S11 S12 S13 S14 S15 S16 S17 Modem Port Scan<*1>: S18 S19 S20 S21 S22 S23 S24 S25 Modem Port Scan<*1>: S26 S27 S28 S29 S30 S31 S32 S33 Modem Port Scan<*1>: S34 S35 S36 S37 S38 S39 S40 S41 Modem Port Scan<*1>: S42 S43 S44 S45 S46 S47 Found a modem on /dev/ttyS0. Modem configuration written to /etc/wvdial.conf. ttyS0<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" ------------------------------ atagar@pc1:~$ sudo vim /etc/wvdial.conf [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Modem Type = Analog Modem Baud = 115200 New PPPD = yes Modem = /dev/ttyS0 ISDN = 0 Phone = 4951000 Password = password Username = guest ------------------------------ atagar@pc1:~$ sudo wvdial --> WvDial: Internet dialer version 1.55 --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT4951000 --> Waiting for carrier. ATDT4951000 CONNECT 45333 V42bis --> Carrier detected. Waiting for prompt. CVX Access Switch. Access is restricted to authorized users only. login: --> Looks like a login prompt. --> Sending: guest guest password: --> Looks like a password prompt. --> Sending: (password) Exiting shell, and starting PPP session. ~[7f]}#@!}!}!} }8}!}$}%\}"}&} }*} } }%}&}0}&>T}'}"}(}"n}#~~[7f]}#@!}!}"} }8}!}$}%\}"}&} }*} } }%}&}0}&>T}'}"}(}"$[11]~ --> PPP negotiation detected. --> Starting pppd at Wed Aug 16 14:11:58 2006 --> Pid of pppd: 5216 --> Using interface ppp0 --> pppd: ??[05][08] --> pppd: ??[05][08] --> pppd: ??[05][08] --> pppd: ??[05][08] --> local IP address 64.40.63.246 --> pppd: ??[05][08] --> remote IP address 64.40.40.6 --> pppd: ??[05][08] --> primary DNS address 64.40.40.53 --> pppd: ??[05][08] --> secondary DNS address 66.54.140.10 --> pppd: ??[05][08] Caught signal 2: Attempting to exit gracefully... --> Terminating on signal 15 --> pppd: ??[05][08] --> Connect time 2.7 minutes. --> pppd: ??[05][08] --> pppd: ??[05][08] --> Disconnecting at Wed Aug 16 14:14:36 2006 Share this post Link to post
Wilhelmus 1 Posted August 17, 2006 Check that Auto DNS is set to yes in /etc/wvdial.conf and it is not commented out. Auto DNS = yes Save and then redial. Or you could try to add your ISP's dns servers to /etc/resolv.conf Code: nameserver 64.40.40.53nameserver 66.54.140.10 Share this post Link to post
danleff 0 Posted August 17, 2006 Wilhelmus, looking at the output of wvdial; --> Carrier detected. Waiting for prompt. CVX Access Switch. Access is restricted to authorized users only. login: --> Looks like a login prompt. --> Sending: guest guest password: --> Looks like a password prompt. --> Sending: (password) Can this mean that the user name and password is not set, so this is why he is getting a disconnect? Or is this set in a script? I have not done dialup in quite a while, so tell me if I am wrong. Share this post Link to post
atagar 0 Posted August 18, 2006 I'm fairly certain this is a set part of the script. When trying to connect there were several failed attempts where it said different things. wvdial seems to be very good at giving verbose output and specifying if anything goes wrong. -Damian Share this post Link to post
atagar 0 Posted August 18, 2006 I've made several changes and had mixed success (trying wvdial after each step). A friend of mine pointed out DialupModemHowto. It suggested adding 'replacedefaultroute' to the end of /etc/ppp/options. I also added both the DNS changes suggested by Wilhelmus. None of these seemed to change the output of the wvdial command, nor did it make the connection work. However, when I tried pon again I got a connection that allowed me to access web pages. Before breaking out the champaign I tried Synaptic to get firestarter and the modem lights component. However, Synaptic failed to connect to the repositories. I also closed Synaptic and tried 'sudo apt-get update' which failed to download anything. After a few minutes the browser connection stopped working as well. I'm about to go on a trip for the weekend so it looks like any further tweaks will need to wait until later. Cest la vi. Share this post Link to post
atagar 0 Posted August 18, 2006 I've decided to switch to Ubuntu to see if it solves the problem. I haven't spotted many cries for help from the diminishing modem using community so whatever's going wrong is probably a subtle issue with Xubuntu. Thanks, though for all the help. Share this post Link to post
atagar 0 Posted August 24, 2006 I just switched to Ubuntu and it has the exact same problem. I determined that the point at which the pon command started partly working was when adding the DNS entries to /etc/resolv.conf. However, it still only allows a brief connection (and doesn't allow Synaptic or apt-get to work at all). Any ideas would be appreciated. -Damian Share this post Link to post
Wilhelmus 1 Posted August 24, 2006 Have you tried: System->Administration->Networking. Select Modem connection and it's Properties. Tick Enable Connection, enter all required information on General tab. Select Modem tab. Click Autodetect. On Options tab, select all checkboxes. Click OK. Try to Activate the connection... Share this post Link to post
atagar 0 Posted August 24, 2006 That's the first thing I tried. It didn't work. Share this post Link to post
danleff 0 Posted August 24, 2006 Can you post the exact model number of the Actiontec modem, located on the back/underneath ID panel of the modem? Share this post Link to post
atagar 0 Posted August 25, 2006 I'm not quite sure what all the numbers mean. It says: US: LNQM508BEX560LKA (it repeats EX56OLKA higher up) Below the barcode: NS2520009335 Hope it helps. Share this post Link to post
danleff 0 Posted August 25, 2006 Take a look at this previous post. Looks like you are not alone. I will have to see what chipset is in this modem. The chipset is not listed on the Actiontec webpage, but note, it has no support for Linux, according to Actiontec. However, the Puppy Linux Wiki shows it as working, but gives no details. Wait a minute...I looked farther down. Is this modem connected via serial or USB? Share this post Link to post
atagar 0 Posted August 26, 2006 The modem has a serial connection. Again, this modem works under Fedora 4 and 5, so it seems like the problem mentioned in the post probably wasn't a mechanical issue. What does "adduser <user name> dip" do? Is this something I should try? I searched the man page for adduser and couldn't figure out what the 'dip' is for. Share this post Link to post
atagar 0 Posted August 26, 2006 I've been testing to what extent the connection works and doesn't... and its a bit odd. Of roughly seven dial attempts with wvdial two were successful (able to load a web page). The first allowed me to go to any site for about a minute. After this I could make google searches and access a gmail account. However, any trying to access any search result would time out. The second attempt again allowed me to travel to web pages for around a minute. However, "ping 4.2.2.2" and "dig www.google.com" both failed. After this I couldn't access any web pages. The gateway seems to be correct (ppp0 when connnected), and the DNS addresses in /etc/ppp/resolv.conf are definitely being set by the ISP (and since it works in Windows, I guess they're valid addresses). Share this post Link to post
danleff 0 Posted August 26, 2006 Let's take a step back and see what you should be doing. To establish a connection, if the modem is supported, all you should need to connect via pon and poff, is the username for your ISP, your password and the name of the device that the modem is connected to. Did you read the Ubuntu wiki page on this, located here? Look at the section under pppconfig & pon/poff. Read that section. You should be choosing the options listed. There should not be any other options listed for the modem connection, except those mentioned. Also, look under the section Configuring the dialup connection to your provider. Share this post Link to post
atagar 0 Posted August 27, 2006 Yes, I did read most of the Ubuntu wiki. I tried the adduser command and my user already belongs to both the dip and dialout groups. Connections through pon and the network gui both die out after the handshake. The wvdial, however, is the one having mixed success (working for a few seconds). I think that I may have found the issue. I checked the DNS addresses with "cat /etc/resolv.conf" immediately after connecting (when it's working) and got the DNS addresses listed by my provider. A few seconds later (when I can't access web pages, but it's still connected) I checked again and found them replaced by 192.168.123.254. I'm not a network spe[censored]t, but isn't the 192 a home ip address range? Perhapse the network is trying to but in on the modem session, messing with the config file... I tried manually changing the /etc/resolv.conf but it switched back to the 192 address after a few seconds. Also the route command had two default listings, one ppp0 and the other ethernet (though I only spotted this issue once). Thus, I'm wondering if there's a way to set the DNS and keep it from being tweaked. Would chmod be a good idea? While I'd like to give Ubuntu a try, if this doesn't start working soon I'm throwing in the towl and going back to Fedora. Share this post Link to post
atagar 0 Posted August 27, 2006 Ah ha! It's working! I disabled the network and connect via wvdial. Both web pages and synaptic appear to be working without any issues. Share this post Link to post
danleff 0 Posted August 27, 2006 Great! My next guess was that the onboard ethernet was interferring with pppconfig and was configured for pon, or set to start at boot-up. Nice work! Share this post Link to post