ata/66 raid card mass storage controller

[ashman 0]

i`ve just install the ata66 raid card

abit be6 mother board

have used the workaround 3 times

but every time have a problem with the

mass storage controller.

and help drivers etc

thanks

[EM 0]

Which ATA66 RAID controller?

 

There is no such thing as too much information.

 

Ed

[ashman 0]

fasttrak66

also when i get it to run.

on reboot after install

i keep getting inaccessible boot device

 

 

s

Quote:

Originally posted by EM:

Which ATA66 RAID controller?

 

There is no such thing as too much information.

 

Ed

[EM 0]

My Fasttrak66 works just fine with the instructions from the Promise website.

 

I have learned the following over the number of times I have reinstalled Win2k. You have to edit every instance of the txtsetup.sif file on your harddrive. This has to be done by booting with a boot disk during the first reboot that the installation does. It seems to vary as to number but there are always either 2 or 3 places where this file appears. First is c:\

the second in $win_nt$.~bt and the third if it there is in c:\$win_nt$.~ls\i386.

 

Make sure to edit each one to remove any line that includes the word ultra66 (there are 4 lines) Then reboot and hit the F6 key to specify SCSI drivers and use the Promise disk for your drivers.

 

I have found that I cannot use ACPI enabled in the BIOS.

 

I do not have a BE6 but a BP6 dual celeron setup.

 

Ed

[ashman 0]

solved the problem !!!!!

 

i had to install the abit ata66 storage drivers for the mother board. once i did this

it acknowledged hpt366 ultra dma66 controller

rebooted and problem fixed.

 

 

thanks