bertemery 0 Posted November 21, 2007 Hello, My monitor has a number of Little vertical colors about a Cm long and quite a few very small green dots on it. It's not a major problem at the moment, but I am afraid they might worse, any ideas? Share this post Link to post
jmmijo 1 Posted November 21, 2007 OK, so what type of monitor ?!? The older CRT/Picture Tube style or the newer LCD Flat-Panel type ?!? Also, have you tried power-cycling the monitor to see if the issue stays ?!? And finally, have you checked the connections, the video cable going from the monitor to the video card ?!? Oh, if you have another monitor to test with to verify if it's the monitor or the video card inside your computer, that would be handy too. You need to narrow down this issue to either the monitor or the computer. I've seen both monitors starting to fail that can produce anomolies on the screen and I've seen video cards failing that can do the same thing. Share this post Link to post
bertemery 0 Posted November 21, 2007 It's a LCD flat panel monitor. I have tried it on another computer and the results are the same so I must assume the fault is the monitor. Share this post Link to post
bertemery 0 Posted November 28, 2007 When I do a Defrag I am told at the end that "some of the files could not be defragmented". Why? Share this post Link to post
jmmijo 1 Posted November 29, 2007 Originally Posted By: bertieboy It's a LCD flat panel monitor. I have tried it on another computer and the results are the same so I must assume the fault is the monitor. That was my next suggestion, when you can see the same issues on the monitor when it's connected to another machine, that does indeed indicate a monitor issue, check with the manufacturer for any warranty repair/servicing. As for the defrag question, could be that some files didn't need to be defragged or they were system files in use at the time. Share this post Link to post
Aussie Bob 0 Posted December 1, 2007 Your defrag problem can easily be sorted out by running it while your computer is running in 'Safe Mode'. Or much better than that, download a trial copy of "Raxco Perfect Disk" from; http://www.raxco.com/ As more your monitor, if it is out of warranty you'd probably be better to forget it and buy a new one. The newer L.C.D.s are getting a lot better image quality and quite a bit cheaper now. Share this post Link to post
bertemery 0 Posted December 4, 2007 I tried to defrag in safe mode but the results were the same. I downloaded Raxco Perfect Disc but was affraid to use it. Share this post Link to post
Aussie Bob 0 Posted December 4, 2007 Why are you afraid to use Raxco Perfect Disk, I have been using it for 5 years on all 3 of my PCs with no problems whatsoever. I have tried Diskeeper, which is what the included defragger with windows is based on, but have not found it anywhere near as good as Perfect Disk. Give it a try. Share this post Link to post
bertemery 0 Posted December 15, 2007 Sorry I have been so long. I did manage to download and use Raxco, you were right,it is good, it did what XP defrag couldn't, now when I open XP defrag and click Analyse, it tells me that this volume does not need defraging, but I don't need XP now, thanks again, Merry Christmas and a Happy New Year. Share this post Link to post
Aussie Bob 0 Posted December 16, 2007 Thanks for the reply. Yeah Perfect Disk is the best of all the dafrag tools that I have tried. And the best of the season to you. Share this post Link to post