tourettes 0 Posted April 23, 2000 I noticed that my Plextor doesn't use DMA-mode any more. I have enabled DMA from secondary IDE channel properties. It worked some time ago, but now it suddenly stopped. Any one got any ideas? I'm not sure if this happened after or before I upgraded Plextor's firmware to 1.07. Share this post Link to post
Belland69 0 Posted April 23, 2000 when you flashed your burner to 1.07 you where supposed to turn DMA off and Reboot before the flash, if you did not do this it won't work after, so go and turn the DMA off, reboot and then reapplythe flash and see if it works. Share this post Link to post
Hammer_One 0 Posted April 23, 2000 The Plextor 8/4/32 CD-Writer uses PIO-Mode 3. It cannot run in DMA mode! Share this post Link to post
HipsterDoofus 0 Posted April 24, 2000 Quote: Originally posted by Hammer_One:The Plextor 8/4/32 CD-Writer uses PIO-Mode 3. It cannot run in DMA mode! Get off the crack. Mine is burning in DMA mode as I speak. Correction: It just finished doing same, successfully. Share this post Link to post
tourettes 0 Posted April 24, 2000 Tried to set first DMA of and then reboot and set it on again, but it didn't work. Then I removed secondary IDE channel from Device Manager and let windows to detect it again. Now DMA works again with my Plextor. Share this post Link to post