Flatline 0 Posted May 3, 2000 I just changed the old p2b-s I had with a vt6x4. When I try to start w2k, i get a BSOD just after it starts loading: it seems something like w2k can't find the hd controller.... How can I fix the things (apart from reinstalling the whole thing?) Share this post Link to post
Seldzar 0 Posted May 3, 2000 As far as I know your out of luck and will need to reinstall. Share this post Link to post
Ge0ph 0 Posted May 3, 2000 I just went through this same thing. I had to start it up with the old motherboard and then change the IDE controler drivers to a default driver and then it would boot with the new motherboard. Share this post Link to post
clutch 1 Posted May 4, 2000 Yeah, Reidyn is completely right dude. I had a install of Win2K AS B3, and I upgraded from a p233MMX and DFI mobo to a Cel 333 and ASUS P3B-F and I got a bigtime STOP error with the hd driver. I wound up reinstalling and went through another 4hr+ ordeal. ------------------ Regards, clutch Share this post Link to post
Reidyn 0 Posted May 4, 2000 You should *ALWAYS*!!!! reinstall your OS when you change something as major as your motherboard. It's not quite as simple replacing your mouse or video card. All kinds of low-level stuff happens on the initial hardware detection. You *MIGHT* be able to force it to redetect everything and work, but why take a chance? Just do it right and reinstall. Share this post Link to post
Flatline 0 Posted May 4, 2000 Well, win98 just did redetect the whole thing without any kind of problem, so I thought I could do the same thing in win2k... Anyway, yes, I'm using an ata66 hd on this controller, while the previous mobo didn't support it, so the hd was running as an u33... I could try disabling it... I did made a backup of the important things, so in effect, reinstalling the system could be the right choice... Share this post Link to post