Jump to content
Compatible Support Forums
Sign in to follow this  
news

bit-tech News: Thermaltake's Spedo chassis

Recommended Posts

Hi all,

 

We have just published a review of *Thermaltake's Spedo chassis*. If you

could post a link on your site that would be very much appreciated.

 

*Link:*

http://www.bit-tech.net/hardware/2008/12/05/thermaltake-spedo/1

 

 

*Picture:*

http://images.bit-tech.net/content_images/2008/12/thermaltake-spedo/fp_img.jpg

 

 

*Quote:

*/On paper the Thermaltake Spedo should be one of the best cases we've

looked at this year, combining a whole range of desirable features like

an excellent cable routing system, easy access drive bays in a highly

configurable setup and an innovative compartment system with one of the

most capable cooling setups we've see here in the bit-tech labs.

 

Sadly what's written on the spec sheet hasn't been translated into the

finished product and while the core steel chassis is well built and very

solid, not to mention nicely finished and painted inside and out, the

plastic components of the Spedo are a colossal let down with the build

quality of a twenty year old Rover and in the case of the ATC plastic

panelling, the usefulness of a chocolate heatsink.

 

We've spent the last few days with the Spedo, photographing and building

our test system into the case, and the list of parts which have broken

through general use is embarrassing. The case door handle (multiple

times), two of the ATC thermal chamber panels, the drive bay catches

(multiple times) and the case trim have all broken, snapped or simply

come off in our hands and are prime examples of the poor quality plastic

Thermaltake has chosen to adorn the case with. We hate to think how the

Spedo would cope with extended use and multiple installs if this is the

level of disintegration we've encountered in just a few days.

 

What's worse is that the Spedo is by no means a budget chassis,

currently retailing for over £125! That's a good £10 //more than the

comparable Cooler Master HAF932, a case which produces similar cooling

and features with much lower noise levels and far, far superior build

quality. We might have forgiven the build quality flaws if the case was

priced £20 or £30 lower than the competition, but at this price point

our criticism is most certainly deserved - you don't expect to pay over

£100 for a case that starts to fall to bits before your system is even

built.

 

Underneath all the plastic rubbish and noisy fans though, there is a

sound core chassis here. The thermal performance figures are very

impressive and the interior is roomy with a couple of very nice little

touches especially in regards to the case's cable management system.

Sadly these aren't enough to compensate for the negatives and despite

its solid thermal performance, there are plenty of cheaper and better

built alternatives out there that we'd opt for instead of the Spedo./

*

 

*Cheers guys!

 

Tim Smalley

www.bit-tech.net

 

 

Share this post


Link to post

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×