Duke 0 Posted June 25, 2000 I'm desperately trying to get my ASUS 6600 Pure to run unter Win2K. System config: Athlon/750, 512 MB RAM, Abit KA7 Mainboard, Adaptec 29160N SCSI, Intel 100Mbit Ethernet The 4in1 4.22 drivers as well as the AGP updated 4.03 drivers are installed and working. I installed the 5.22, 5.25, 5.30 Detonator2 drivers from NVIDIA; the ASUS drivers cause the system to hang during boot-up. I'm at my wits' end, thus any help will be greatly appreciated. Thanx... Share this post Link to post
kgeissler 0 Posted June 25, 2000 Your system is similar to mine. I also have the KA7. When I installed my Annihilator 2, it work give me a blue screen on boot. Turned out to be a faulty memory chip. Have you tried to disable the 4x AGP support in the BIOS and see if that works? Share this post Link to post
Duke 0 Posted June 26, 2000 oh BTW, this probably isn't a hardware problem with the card, since it worked great under NT4... Regards Share this post Link to post
Dragon-Lord 0 Posted June 26, 2000 Capt'n, we're gonna need mo' power!!! :} [This message has been edited by Dragon-Lord (edited 26 June 2000).] Share this post Link to post
peterro 0 Posted June 27, 2000 If you are running a Athlon system, you should have a MINIUM power supply of 250W. Personally, I wouldn't buy anything under 300W, then you are sure you have enough! ------------------ AMD Athlon 750MHz ASUS K7V ASUS V6800 PURE 128MB 133RAM 20,5 GB IBM HD Share this post Link to post
Duke 0 Posted June 30, 2000 Thanks all, I got it working now. "Standard PC" instead of "ACPI PC" in Device Manager is the key. CU around *DUKE* Share this post Link to post
SpongeMaster 0 Posted July 2, 2000 That's odd. I have a KA7 and CLAP2 and win2k would not boot unless I had ACPI enabled. Share this post Link to post
thailo 0 Posted July 3, 2000 I have a duel P3 Xeon 550 with a Tyan Thunder X motherboard and a Hercules 3D Prophet II 64mb and when I use the 5.22 or 5.3 drivers, I blue screen as soon as I start a game. Share this post Link to post