Jump to content
Compatible Support Forums
Sign in to follow this  
radu185

Pecular Win2k DUN problem

Recommended Posts

My Windows 2000 Pro has recently devloped a strange little DUN problem....

After a hard reboot, I connect to the internet flawlessly. It also disconencts flawlessly........

The problem comes when I try to re-connect.

It proceeds up to the point where it says "Verifying User name and Password", then it simply stalls. After a couple mins(anywhere from 2-5), it disconnects with the following error: "Error 619: The Specified Port is not connected"

I figures out what the error means, and what Win2k says I should do to fix it, which is "reboot your computer to make sure configuration settings take effect" So i reboot, and it works fine again till i want to reconnect again without rebooting..... It'd begenning to drive me crazy!

Win2k first did this about 4 days ago.

I lived with it for 2, then formatted and reinstalled from scratch, and it was fine up until about 3 hours ago(Aug 22nd)when the problem came back up again!

 

Heres my hardware if it helps

Celeron 366

128mb RAM

Intel MU440EX mobo

Aztech 56k PCI winmodem(i know, yuck!)

PCI Voodoo Banshee 16mb

Matrox 10gb

Yamaha ymf740

 

oh ya, i even uninstalled the modem(and delted driver files) and let windows reinstall from the CD(no latest drivers.....Aztech doesnt seem to know what Windows 2000 is.....Bastards)

I also tried it with an old ISA 288 i have lying around.... so I have a feeling its windows itself being stupid, not my hardware.

Any help will be greatly appreciated.

Share this post


Link to post

Forgot to add this, if it helps any....

an excerpt from win2ks modem log

08-22-2000 22:01:19.242 - Modem type: MDP7800-U Modem

08-22-2000 22:01:19.242 - Modem inf path: mdmlt3.inf

08-22-2000 22:01:19.242 - Modem inf section: Modem_PNP_DF

08-22-2000 22:01:19.492 - Opening Modem

08-22-2000 22:01:19.502 - 115200,8,N,1, ctsfl=1, rtsctl=2

08-22-2000 22:01:19.502 - Initializing modem.

08-22-2000 22:01:19.512 - Send: AT<cr>

08-22-2000 22:01:19.533 - Recv: AT<cr>

08-22-2000 22:01:19.533 - Command Echo

08-22-2000 22:01:19.533 - Recv: <cr><lf>OK<cr><lf>

08-22-2000 22:01:19.533 - Interpreted response: OK

08-22-2000 22:01:19.533 - TSP(0000): Making call

08-22-2000 22:01:19.543 - Send: AT &F E0 &C1 &D2 V1 S0=0\V1<cr>

08-22-2000 22:01:19.833 - Recv: AT &F E0 &C1 &D2 V1 S0=0\V1<cr>

08-22-2000 22:01:19.833 - Command Echo

08-22-2000 22:01:19.833 - Recv: <cr><lf>OK<cr><lf>

08-22-2000 22:01:19.833 - Interpreted response: OK

08-22-2000 22:01:19.843 - Send: ATS7=60S30=0L0M1\N3%C1&K3B0B15B2N1\J1X4<cr>

08-22-2000 22:01:19.863 - Recv: <cr><lf>OK<cr><lf>

08-22-2000 22:01:19.863 - Interpreted response: OK

08-22-2000 22:01:19.863 - Waiting for a call.

08-22-2000 22:01:19.873 - Send: ATS0=0<cr>

08-22-2000 22:01:19.893 - Recv: <cr><lf>OK<cr><lf>

08-22-2000 22:01:19.893 - Interpreted response: OK

08-22-2000 22:01:19.893 - 115200,8,N,1, ctsfl=1, rtsctl=2

08-22-2000 22:01:19.893 - Initializing modem.

08-22-2000 22:01:19.903 - Send: AT<cr>

08-22-2000 22:01:19.923 - Recv: <cr><lf>OK<cr><lf>

08-22-2000 22:01:19.923 - Interpreted response: OK

08-22-2000 22:01:19.933 - Send: AT &F E0 &C1 &D2 V1 S0=0\V1<cr>

08-22-2000 22:01:20.224 - Recv: <cr><lf>OK<cr><lf>

08-22-2000 22:01:20.224 - Interpreted response: OK

08-22-2000 22:01:20.234 - Send: ATS7=60S30=0L0M1\N3%C1&K3B0B15B2N1\J1X4<cr>

08-22-2000 22:01:20.254 - Recv: <cr><lf>OK<cr><lf>

08-22-2000 22:01:20.254 - Interpreted response: OK

08-22-2000 22:01:20.254 - Dialing.

08-22-2000 22:01:20.254 - TSP(0000): LINEEVENT: LINECALLSTATE_DIALING

08-22-2000 22:01:20.254 - TSP(0000): LINEEVENT: LINECALLSTATE_PROCEEDING

08-22-2000 22:01:20.264 - Send: ATDT#######<cr>

08-22-2000 22:01:46.421 - Recv: <cr><lf>CONNECT 45333 V42bis<cr><lf>

08-22-2000 22:01:46.421 - Interpreted response: Connect

08-22-2000 22:01:46.421 - Receive Connect but CD was low, Waiting for signal to go high

08-22-2000 22:01:46.441 - CD has been raised

08-22-2000 22:01:46.441 - Connection established at 45333bps.

08-22-2000 22:01:46.441 - Error-control on.

08-22-2000 22:01:46.441 - Data compression on.

08-22-2000 22:01:46.441 - TSP(0000): LINEEVENT: LINECALLSTATE_CONNECTED

08-22-2000 22:02:16.444 - Read: Total: 42, Per/Sec: 0, Written: Total: 83, Per/Sec: 0

08-22-2000 22:02:46.938 - CD dropped--Remote modem hung up. ModemStatus=00000030

08-22-2000 22:02:46.938 - TSP(0000): LINEEVENT: LINECALLSTATE_DISCONNECTED(0x1)

08-22-2000 22:02:46.938 - TSP(0000): Dropping call

08-22-2000 22:02:46.938 - Hanging up the modem.

08-22-2000 22:02:46.938 - Recv: <cr><lf>NO CARRIER<cr><lf>

08-22-2000 22:02:46.948 - Interpreted response: No Carrier

08-22-2000 22:02:46.958 - Send: ATH E1<cr>

08-22-2000 22:02:47.249 - Recv: <cr><lf>OK<cr><lf>

Share this post


Link to post

Well after doing a quick lookup of your modem I find that it is an Lucent modem manufactured by Aztech. Are you using the latest Lucent driver version? See Lucent modems are software modems and they rely on a driver to interpret normal phone commands from the system and change them into the actual tones on the phone line. Lots of times what happens is something in this driver messes up. When that happens you normally have to just simply remove your modem from the modem control panel and reboot. Then Windows will reinstall the modem and write over the current files and reinitialize any possible support files that it may be using

Share this post


Link to post

Gee, I was reading this BBS to see if I could find a problem similar to mine, and there you go.

 

I had EXACTLY the same problem.

 

Now I reinstalled win2k - the prob is gone.

 

I was using sp1, dx8beta, IE 5.5.

My specs:Gigabyte 7-IX, 128Mb, K7 700, G400 DH 32Mb, Sblive, Diamond Supraexpress 56k external. Latest drivers and bios for everything.

 

Now I wonder what the problem is, it was really anoying having to reboot every time I wanted to reconnect to the internet...

Share this post


Link to post

JediBaron i wish it were that simple......

Ive tried that many times, even tried a diff PCI slot AND an ISA hardware modem.....

Neither one solved the problem.

 

I'm getting ready to do a full format this time, and see if that fixes it(last time i just deleted win2k and fdisk/mbr because i didnt want to loose my stuff)

Share this post


Link to post

I don´t think it´s a modem specific problem, I have a completly diferent hardware platform and an external hardware modem and had the same problem.

 

Only a fresh install cured it.

Share this post


Link to post

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×