aphex187 0 Posted October 4, 2000 I have a HP 8100 CDRW. A few weeks ago I could no longer record CDs. This came shortly after I installed a slave drive (fujitsu - see below) on the primary ide bus and a 48x CDROM as slave on the secondary bus. Win2k sees the CDRW and reads from it fine but both CDRWIN and EasyCD Creator 4.02 will not burn. I tried different cables, unhooked all other devices and even reinstalled Win2k. I put the drive in a WinME machine I have here and it worked flawlessly which means the CDRW is not broken, obviously. Also, the drive WAS working fine under Win2k a few weeks ago. The error CDRWIN spits back at me is: "Error: 'START DAO RECORDING' command failed on device 0:1:0. Cuesheet was rejected by the CDROM recorder". This happens when I try and burn any cd. This is not an issue with the file being to big or whatever. EasyCD Creator Spits back some CDDB error I do not have directly in front of me Aspichk responds that I have v4.60 (1021) properly installed. It is not an ASPI issue. Any advice would be appreciated. My system stats are as follows: Asus P3B-F P3-600EB Slot1 128MB PC133 RAM (2x64mb) STB Velocity4400 16MB TNT Video card HP CD-Writer+ 8100i CDRW Creative 48x CDROM Maxtor 9100D 10GB HDD - C & D drive Fujitsu 4GB HDD Microsoft Intellimouse Pro Microsoft Natural Elite USB Keyboard Mitsubishi DiamondPro 900u 19" Monitor 3Com 3C905-TX (for LAN) Kingston LNE100TX NIC (for DSL modem) Creative SoundBlaster Live Running Windows2000 v5.00.2195 w/ SP1 [This message has been edited by aphex187 (edited 06 October 2000).] Share this post Link to post
DeadCats 0 Posted October 4, 2000 Maybe I missed it somewhere in there, but could you please state what drives you have on which controllers, and whether master or slave? ------------------ "This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future!" -Adolph Hitler, 1935 Share this post Link to post
aphex187 0 Posted October 6, 2000 Its setup as follows: Maxtor 10GB HDD - Master on Primary Bus Fujitsu 3GB HDD - Slave on Primary Bus HP 8100 CDRW - Master on Secondary Bus Creative 48x - Slave on Secondary Bus Thanks Share this post Link to post
DeadCats 0 Posted October 6, 2000 Man, I just don't have any good answers for you (but maybe someone else does?). That's about the way I have mine setup, except mine are: Maxtor 30GB as Master on Primary IDE Channel Maxtor 8Gb as Slave on Primary IDE Channel HP 8100i as Master on Secondary IDE Channel Creative 6x/24x DVD as Slave on Secondary IDE Channel And everything works fine, of course (doncha just hate it when someone says, "Mine works!"). Using Adaptec Easy CD Creator 4.02d. You might check to see if they're set to use "DMA if Available" under Control Panel>System>Hardware>Device Manager>IDEATA/ATAPI Controllers. Sorry I couldn't have been more help. Share this post Link to post
aphex187 0 Posted October 6, 2000 Thanks anyways. I'm wonderng if there is some way to test the secondary IDE channel on this motherboard. With all the different things I have tried I'm wondering if there is something physically wrong with this motherboard? Anyone had any problems with the Asus P3B-F? Share this post Link to post
tristan777 0 Posted October 7, 2000 hmmm... did u try pulling the slave drives to see if it works? my guess would be, it's the creative drive. that drive is evil incarnate. i myself had one. along with... about 5 other people i know. and they all broke. in different ways, but they broke. Share this post Link to post
