Jump to content
Compatible Support Forums
Sign in to follow this  
Ronin

Overclocking Geforce 2 Ultra

Recommended Posts

I have an Elsa Gladiac Ultra card and when I enable the coolbits feature and try to overclock the card it will not keep the settings after a reboot. Now I don't even think the overclocking feature works because I can set the memory/chip clock to the max and the card should crash and not work at all but it seems to work fine but I see no difference in FPS.

 

Now before you say anything I'm using the 6.49 drivers and these drivers overclocked my Geforce 2 card without a problem and the settings stayed in place even after a reboot.

 

Any ideas, or another program I could use. Power Strip 2.78 does not work for overclocking the ultra card but it works ok for the Geforce 2 card?

 

Driver suggestions another program for overclocking would be great if anyone has an ideas.

 

Thanks,

 

...

 

------------------

My W2k & Whistler System:

 

Dual Intel 850's

Tyan Thunder 2400 MB

Onboard Intel 82559 NIC

512 Megs Ram

Adaptec 39160 Ultra 160

2 - 18 Gig Cheetah - U160

1 - 18 Gig Cheetah U2W

1 - Maxtor 60 Gig (IDE)

SB Live Platinum 5.1

Plextor 12/4/32 - Burner

Plextor 40x UW CD-Rom

10x Sony DVD Drive

Elsa Gladiac Ultra 64 Meg

Dual V2 Cards, for D2

Viewsonic PF815 22" Monitor

...

My Linux System:

 

PIII 733

Asus P3C4X MB

256 Megs PC133 Mem

Adaptec U2W Scsi Card

1 - 9 Gig Cheetah 10K

48x IDE CD-Rom

CL Geforce DDR

ESS 1371 Sound Card

Share this post


Link to post

I had the same thing happen with a GeForce SDR from a Dell PC. I could use any setting, but no difference. I put in a VisionTek GeForce SDR, and it worked fine. Same drivers (6.31) and same hardware config. In addition, I don't think you have enough processor to make the overclocking worth it, besides, the memory is running so close the max spec that it probably wont go any further.

 

------------------

Regards,

 

clutch

Share this post


Link to post

Clutch,

 

Thanks for your responce but what you said does not help me out. Please read the post more clearly and you will see what I'm talking about.

Share this post


Link to post

I had the same problem with 6.47 Detonators drivers so that may be a characteristic of that series.

 

The 6.62 drivers overclock correctly with coolbits and hardware tab after replacement of NvCpl.dll by the one included with 6.31.

Share this post


Link to post

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×