Hardware or Software USB problem

[repairs online 0]

I have a 4gb unbranded USB stick which I am unable to access. The control IC is an AU6986 and the two memory ICs are: SAMSUNG 822 (K9GAG08U0M). Using a program called USBVIEW came up with the following info, see below.

 

I recognize some of the info only.

 

When inserting the usb into a computer, the light on the usb begins to flash ON and OFF and then stays constantly ON. On a normal usb, the light should stay OFF and flash ON and OFF when info is being read or written to it.

 

Can I assume from the info below that the control IC is OK or partially OK (can this situation exist?)

 

USB is detected but showing zero bytes. The message that comes up when trying to open the USB is: "Please insert a disk into drive F:" or what ever drive is assigned to the USB port.

 

Else where, it has being suggested the MBR (Master Boot Record) may be corrupt.

 

Any suggestions how to access the data on the USB, tries several programs, without success, the light on the USB stays on.

 

 

 

Device Descriptor:

bcdUSB: 0x0200

bDeviceClass: 0x00

bDeviceSubClass: 0x00

bDeviceProtocol: 0x00

bMaxPacketSize0: 0x40 (64)

idVendor: 0x058F (Alcor Micro, Inc.)

idProduct: 0x1234

bcdDevice: 0x0001

iManufacturer: 0x01

0x0409: "Alcor Micro"

iProduct: 0x02

0x0409: "Mass Storage Device"

iSerialNumber: 0x00

bNumConfigurations: 0x01

 

ConnectionStatus: DeviceConnected

Current Config Value: 0x01

Device Bus Speed: High

Device Address: 0x02

Open Pipes: 2

 

Endpoint Descriptor:

bEndpointAddress: 0x01 OUT

Transfer Type: Bulk

wMaxPacketSize: 0x0200 (512)

bInterval: 0x00

 

Endpoint Descriptor:

bEndpointAddress: 0x82 IN

Transfer Type: Bulk

wMaxPacketSize: 0x0200 (512)

bInterval: 0x00

 

Configuration Descriptor:

wTotalLength: 0x0020

bNumInterfaces: 0x01

bConfigurationValue: 0x01

iConfiguration: 0x00

bmAttributes: 0x80 (Bus Powered )

MaxPower: 0x32 (100 Ma)

 

Interface Descriptor:

bInterfaceNumber: 0x00

bAlternateSetting: 0x00

bNumEndpoints: 0x02

bInterfaceClass: 0x08

bInterfaceSubClass: 0x06

bInterfaceProtocol: 0x50

iInterface: 0x00

 

Endpoint Descriptor:

bEndpointAddress: 0x01 OUT

Transfer Type: Bulk

wMaxPacketSize: 0x0200 (512)

bInterval: 0x00

 

Endpoint Descriptor:

bEndpointAddress: 0x82 IN

Transfer Type: Bulk