Psion 0 Posted December 28, 2003 I've got an old PC which I concidering making into a Hardware Firewall running poss Mandrake 9.2 > The hardware spec is: CPU=233MHz AMD (socket 7) - I might have a 400MHz somewhere.. Mem=64Mb pc100 (Dimms) min Graph=16Mb Banshie 2 or NvNti 32Mb Sound=Soundblaster 32AW 10Gb HDD I might also dual install win98se to run some old games. My question is what is the best possible way to set-up a network to go through this PC to access the net (full internet support)? My current network is: Desktop running win2000pro (used as server for file and data storage). Laptop running winXPhome / Mandrake 9.2 (used as test unit and mobile demonstrations) HP 10/100 network printer All connected via a 10/100 Ethernet HUB, pre set IP addresses for all. Current Internet access is via a software firewall protected software proxy server (on main desktop). If you need more info, please ask. Please keep in mind a low budget... Share this post Link to post
mksoccer 0 Posted December 29, 2003 Why not use something like Smoothwall? It is a fully locked down version of the Linux kernel (2.4.22, I believe). That way, you get a fully functional hardware firewall, and your computer specs will definitely be enough to handle it. They just released version Smoothwall 2.0 Express, and I'm running it on my home network. Check it out! www.smoothwall.org Share this post Link to post
Psion 0 Posted December 29, 2003 Cheers mksoccer, I might go for that, could I configure this unit to handle mail too. That is > could this unit that will connect to the net, be configured to send and retrieve emails and then my network PC's snd/rcv from the server? I am also concidering another unit (prob a 1.4GHz) to be used as the main data server for the network, is Linux a good choice for this too. Some terminals will have to be running a windows platform due to compatibility with my clients. Share this post Link to post
madmanx 0 Posted December 30, 2003 Hello Psion, You could also use a distribution known as IPCOP - www.ipcop.org. As for your server, Linux makes a fine server - Windows computers wil have no problems connecting to it at all. A very easy one to use is Xandros - it has a very simple Windows server wizard - www.xandros.com. Cheers! Share this post Link to post
Psion 0 Posted December 30, 2003 Cheers all, I shall keep this in mind, if I do get another server... Share this post Link to post
Psion 0 Posted December 30, 2003 Ok, I have just tried installing Mandrake 9.2 onto the above mentioned system. I tried installing over the top of the exhisting win98 install. Deleted the partition and created a new / mounted on hda (2G) and then the 2nd HDD was split into /usr and a swap disc (2G again). after formating the drives hda & hdb > it gives the error no hdlabel What have I done wrong? Share this post Link to post
Psion 0 Posted December 31, 2003 Sorry, the error was "no hdlist" It then request trying again but the same error arrives every time... HELP! Share this post Link to post